Jump to content
SAU Community

Who knows about PAINT


Recommended Posts

Guest YZF-R1 Maniac

Hey guys. Im in the market for a R33 Skyline GTS-25T at the moment. Been looking in all the usual places and most of the good cars i can find are white. I realise that it is a major job to change the colour of a car(well to do it right anyway) Has anyone changed the colour of their car and if so what sort of price did it cost them?

Also how hard are the lower standard front bars to find if i got a car without one on it already.

Cheers:burnout:

Link to comment
https://www.sau.com.au/forums/topic/17606-who-knows-about-paint/
Share on other sites

i dont know about tassie but here in syd u wont get a change colour job for less than 5k

and i assume that u are talking about the m spec lower front bar cos there should be a few around the wreckers, might have a few scratches or not the right colour but there gonna cost u about $4-$500

if the factory option bar (you refer to as M-spec) is up to 500 bucks, cant you get a GTR copy for 550? looks way better, but i suppose then its another 150 for indicators... But still, is better in the end if ur getting FMIC as the mouth on GTR bar is much better for intercooler airflow. (I say that but im running FMIC with the non-factory option, most restrictive front bar you can get :cheers:)

Yeah if you are going to do a full respray then I'd get a GTR copy bar. Personally I think you'd save more money by finding a car the right colour in the first place. Finding a coloured one with similar condition/mods than a white one may cost a little more but not $5k more. It's often less.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...