Jump to content
SAU Community

Recommended Posts

All,

After thinking long and hard over what new car to get, I have decided to stay with a GTR, Im keen to do some more serious track times so I am looking at an R32's GTR, which I can take one step further then my R34.

I have found a real (Checked with Nisan) R32 GTR Vspec 93 model 77,000 Km, mods are listed below.

HKS 2540 turbos

HKS 264 cams

HKS Turbo Manifold

HKS Dump pipes

HKS Header pipes

HKS Inlet pipes

HKS Pods

HKS Intercooler

HKS Hyper Damper Suspension

HKS Remote oil filter and cooler

Adj Cam sprockets

OS Twin Plate Clutch

Metal Head and other gaskit's

Apexi PFC and hand controller

Upgraded fuel pump

800CC Injectors

90mm exhaust

Cuscal Remote catch can

Cuscal radiator deflector

17in Advan wheels

Caster Adj front

Boost gauge

Turbo timer

The Vspec STD Brembo Barkes, Vspec diff and Brake vents

UAS Dyno showed 280KW at 15PSI (With 2.5'' crap Cat) and Comp check was approx 140PSI on all 6, under carriage is a straight as they come and the interior is in good condition.

I plan to do some additional mods.

Water Menthol injection, Fat belly Cat, RB25 Airflows and pods, Sump Baffle, DBA rotors and Frodo 2500’s, Upgrade the radiator, Camber kit and alloy bushes, Retune.

Buy price is $25K with 12 months rego.

What do people think about the car and the price?

Im thinking of placing a deposit today, so appreciate the feedback.

Thanks

post-42-1184104281_thumb.jpg

post-42-1184104286_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

That is the intent! Im moving work location and will be doing far less street Km's so I can allow this car to be a lot more aggresive then I have with my previous GTR's.

I guess my question is around market price for a car like this. The ass has dropped out of the market a little, and I wonder if I am paying too much for this car?

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222957
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222963
Share on other sites

Hey car sounds good, price sound close to being right possibly a little high.

I know godzl1975 is selling his car on the quiet and i was very tempted to buy it but i didnt have the bank to support it in the long run.

His car is unbelievable! You should check it out.

Thanks, car looks good, I have sent him a PM for his number, so we discuss.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3222974
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223159
Share on other sites

so who put the metal head gasket in? was it done in aus? were any other internals done?

with those mods and shitty looking wheels like that tells you the car wasnt sitting in a show room.

my money is on it craps itself before the 100k service..

my opinion is to buy a gtr with great body and screwed engine for about the $15k mark and use the 10k to rebuild your own engine..

that way you know what you've done to is and work has warranty (to some degree). also the car feels more like your own becaause you have decided what you want from it.

only dis advantace is that you wont have the car for a while while an engine is built.

thats the way my brain works ;)

The car looks to have had the work done in Japan a fair while ago, except for plugs its as it left Japan.

I started with that mind set, accept The parts and Labour bill hit almost $20k (Internals/turbo's/clutch/ and acc's), and I have had trouble finding cheap late 32's without damaged or rusted rails. I have only been looking for 3 weeks both here and in Jap auctions.

Point taken but I have run out of time. I loose the 34 in a couple of weeks and need wheels.

Link to comment
https://www.sau.com.au/forums/topic/176091-ozs-new-gtr/#findComment-3223203
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...