Jump to content
SAU Community

How-To change over Spark Plugs Link???

JUN R33

By JUN R33,
in Engines & Forced Induction

 Share

Recommended Posts

DennisRB30 Community Regular

DennisRB30

Posted
Posted

I don't know where the link is but I done it the other day without any information, its not rocket science. Remove the crossover pipe, remove the plastic plate thing pull the coil packs of the plugs and change them. You will know what to do once you get into iy.

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

also it maybe hard to get the coil packs off the spark plug, dont be scared...when you remove the pack there will be a little pop cos of the rubber and the plug, are really tight together and theres no air or space to get it so come off softly. But anyways be carefull and firm when you pull them off, dont rip them off. Firm but not ruff..the last thing you want is new coil pack..i'm babaling abit but eh..i'm bored

rwong20012 Apprentice

rwong20012

Posted
Posted

This is the site your looking for JUNR33 its got photos and all of how to do it, did my the other week and gap the plugs to 1.1mm after a week it started misfiring so i recommend you gap them to 0.9m or 0.8mm just trial and error whatever works best GOOD LUCK =)

http://homepages.kcbbs.gen.nz/benk/gtst/Fi...ndplugmaint.htm

predator Grand Master

predator

Posted
Posted

yer, you need a feeler guage to gap the plugs if you're unfamiliar with that. They're about $5-$10 from Repco, SuperCheap Auto, etc although I bought mine from Bunnings in the auto section.

You stick the appropriate mm guages under the head of the plug and use a hammer to gently tap it to the required gap. Pretty easy process.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dyl33
      Cleaning my wheels 😍

      By dyl33 · Posted

      I steam cleaned my near new set of volk gtc wheels 14 years ago and farrkkked them lol. The clear coat cracked like spider webbing in several areas. Lesson learnt don't do that. 😭
    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      If you don't touch the CAS, then you're fine.
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
×
×
  • Create New...