Jump to content
SAU Community

Recommended Posts

The engine is out of my r33 gtst that went 10.5 @ 125mph a couple of months ago, new setup is being built so this stuff has got to go!

RB25 long motor, sump to rocker cover, has forged pistons, shot peened rods, prepped crank and block, ported head, genuine nissan head gasket, tomei 256degree poncams, tomei exhaust cam gear. this engine made 480rwhp with 24psi through a gt3540. runs perfect and comp tested perfect before being pulled out of the car. $5000 or very close offer!

polished plazmaman plenum, bolt's to standard runners, 600x300x75 intercooler with polished alloy pipes and turbosmart bov to suit the plazmaman plenum, incuded is the exhaust manifold to suit a gt3540 and a 38mm wastegate but no turbo and gate. plenum cooler with pipes and exhaust manifold $2450 or very close offer!

850cc sard injectors(side feed) with rail and sard reg $850 or very close offer!

apexi power fc and z32 afm with harness $1000 or close offer!

or the complete engine with all the above for $8500, all you need is a 3540 and a gate and you got a reliable 10 sec package!!!!!

Als raceglides built c4 auto, full roller bearing, all the good gear inside, deep pan, transbrake, 3500rpm converter and a b&m pro ratchet shifter and tailshaft for r33. $4200 or close offer! box is awsome and still usable on the street!

offers only by pm or you can call Alex on 0413 311 919.

Edited by CRNAGE
Link to comment
https://www.sau.com.au/forums/topic/176318-fs-rb25-10sec-setup/
Share on other sites

Hey mate. Do you have any more specs of the auto. What power was it built to handle??

what specs are you after? it will cop 800hp no prob, this box will go in the 9's!!!

Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........ P.S is his for a manuel

Edited by spudsr33
Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........

sydney, no hand controller and yes its for series 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
    • Just saw this, redacted names. It's on a R33 GTS-t Facebook group. Looks like still teething issues.
×
×
  • Create New...