Jump to content
SAU Community

Recommended Posts

hey all .

im new around here just joined up as my current car is for sale and i am looking for a r32 gts-t.

but i have a few questons regarding them:

do all series r32's come with the projector headlights? or just the late model ones?

what is the differences between s1 and s2?

anything i should look out for when looking at a car? i.e rust in common places etc?

also if there is anything you want me to kno about when looking at them plz tell me.

cheers

jono

Link to comment
https://www.sau.com.au/forums/topic/176358-r32-gtsts/
Share on other sites

projector headlights came in series 2 r32's

Difference between series 1 and 2 include;

- s2 heavier by a bit due to reinforcement bars in doors.

- Different steering wheel (tried fitting s1 wheel onto my s2 r32 yesterday, completely different setup yet they look the same)

- s2 plastic interior is the rough grainy look, where s1 has smooth plastic around the headunit etc

- s2 has grey faces on the dash, where s1 has blue

- s2 has a different ac compressor

- s2 has different interior cloth on the seats

- s2 most come with electronic front spoiler (although i think its an option)

There is a lot of small differences between the two series' but they all make a difference :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/176358-r32-gtsts/#findComment-3226726
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wish I had this advice when I did my pump. It went in and out 3 or 4 times, and on the last time it snapped.
    • Tried them, they leaked. I also foolishly bought some random rubber ones that leaked too.  Genuine and not looked back.    As always though sample size of one, and I could have made a mistake installing them. 
    • Technically still manual process to set it first time though
    • Shit job but not hard. I'd use a piece of wood to knock the plastic lid open to avoid damaging it, use a vacuum to clean up the fuel sender lid also so crap doesn't fall in. I'd probably do pump and filter at the same time since you're already in there, I reused my OEM sock after a quick clean since the one provided wasn't long enough. Could also hardwire your pump if you feel inclined.
    • Supercheap auto sell this: https://www.supercheapauto.com.au/p/pat-plusquip-fuel-tank-lock-ring-tool---universal-kit/SPO3564082.html I own this and if you HAVE PATIENCE you can remove it without snapping lines and generally being incredibly angry, then said at doing this job. Sadly I've removed the pump about 75,000 times over the years. I don't know if you're a large lad or a smaller lad but my advice to you as someone who is 185cm is if you are my height or smaller, is to sit in the boot and take your time. Yes you can put the seal on. The seal goes over the white thing/lid (you will see how it 'slots' in) then the whole assembly presses into the tank. then you screw the lock ring on. I spent so much time doing things the wrong way by trying to mount the seal into the tank first, then putting the white fuel hat on in the space provided. Put it together first then it'll all go in. But seriously be careful about removing the hoses AND where the removal tool is moving relative to the plastic pipes coming out of the lid when you've removed it. IT IS BRITTLE So brittle in fact I have two spare lids, and would recommend buying a spare and having it handy before attempting to do this. May as well throw https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD in the tank as well, as this uses all stock plugs and such. You may need to/strongly recommend you re-use your OEM fuel sock or use the one supplied with a length of hose so it sits at the stock height.
×
×
  • Create New...