Jump to content
SAU Community

Intake Plenum


Craney
 Share

Recommended Posts

Can anyone point me in the direction of a dealer that supplies greddy intake plenums for r34 gt-t?

Dont think they exist, but can use an r33 one, notsure if the rail/injectors bolt up though, i know the copy's fit r33 and r34 though. Try some of the business traders, crd and others should be able to help you at a good price

Link to comment
Share on other sites

Can anyone point me in the direction of a dealer that supplies greddy intake plenums for r34 gt-t?

peter from advan 02 96471326 he is a dealer or autobarn or rhdjapan.com these guys are good

Link to comment
Share on other sites

peter from advan 02 96471326 he is a dealer or autobarn or rhdjapan.com these guys are good

Advan were removed from distributorship......

there is a thread somewhere where i posted pic on how to install R33 plenum on R34.

DisregardKW KINGS post as it makes no sense... there is no cutting required.... PLAZAMANS gear is overpriced.... if your on a budget a copy greddy would be a better option.

Link to comment
Share on other sites

Advan were removed from distributorship......

there is a thread somewhere where i posted pic on how to install R33 plenum on R34.

DisregardKW KINGS post as it makes no sense... there is no cutting required.... PLAZAMANS gear is overpriced.... if your on a budget a copy greddy would be a better option.

advan got the flick ,interesting ......

Link to comment
Share on other sites

hey can anyone point me in the direction of that install pic uras is talking about. If found lots of threads talking about it but no real installation help.

and if anyone knows what a good throttle body for it would be that'd be good as well.

Edited by Craney
Link to comment
Share on other sites

thx heaps uras, well i guess the greddy is the way to go and from what i read a q45 throttle body goes well if i can find one.

dave from sleeka spares in SA had a few last time we were there.

Link to comment
Share on other sites

After some deliberation I also went with the greddy. Price was definitely but not the only factor. There is still some dicking around with the greddy but at least they try and make it easier by providing the neccessary vacuum and water ports plus the necessary bolts, hoses, clamps etc to assist in the task.

I had difficulty locating a q45 so I went with a new aftermarket 90 mil throttle body, we had no probs mating it to the plenum and the standard throttle sensor just hooks straight up to it. You will need to have a throttle cable made up but its no biggie.

My bud tried the Greddy copy but ended up giving it away simply because there is just too much work to do locating and fitting the above mentioned ports etc plus it didnt sit too flush with the head anyway so required facing before he could even start.

GL with whatever you decide but for me I am way happy with the Greddy choice. :D

Link to comment
Share on other sites

I just had a bad experience with a HYPERTUNE plenum for a EVO (real animal with well over 300awkw), awesome plenum.... but the HYPERTUNE throttle bodys are a bit average.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...