Would this work?

[WazR32GTSt]

Let me first state that i don't know much about turbochargers, as i'm new to the whole turbo thing...

Would this work?

http://www.supras.com/sogidb/index.php?jum...y_techtip&id=17

Just saw it and thought i would see if this is something we can adapt to skylines...

Waz.

[adam 32]

yes it would work

but so would pitting pin-prick holes in your actuator line

i personally wouldnt do it, but hey. if you cant afford a bleed valve

[MattyB]

you could also add extra springs which would work better than a bleed valve.

as such put a spring at the end of the rod (part corrected to valve on turbo) and bring back to the end where the hose connects up. its really difficult to set the correct ammount of tention and to adjust it. but works perfectly once done.

when using bleed valves the waste gate can open its self when the exhaust manifold pressure gets too high anyway. only increasing the spring tention will stop that.

[Squizz]

It would work, no different to bending the actuator arm.

[DanS15]

Also no different to drilling a second hole at the end of the actuator rod, making the rod shorter when u fit it back onto the waste gate.