Help

[Fujiwara]

Hey guys.

Was trying to install the lights in the AC unit.

And now i broke one of the bulbs(existing) and i think i cant use the holder anymore as well.

I recieved 3x LED's and 3 x lights that look exactly like the dash lights.

Problem was that these lil bulbs would not come out of the holders, so i broke one of the bulbs

This is the comparison. I don't believe these lights can fit into the holders.

What do i do???

Are there any places where i can get a replacement holder for the light?

And how am i meant to fit these lights in to the AC button bit? As they didn't come with holders, and i don't think the existing holders allow the bulb to come out.

HELPPP!!!!

Edited July 17, 2007 by Fujiwara

[Boss-zilla]

from my understanding these are a all in one unit so the leds will not fit unless they come with the holders.

Get a refund on the LED's.

[RANDY]

Those are wedge-bulb LED's...

1) You need to unwrap the wires before you pull the bulbs out.

2) I have not found any pre-made bulbs that will work in those holders

Apart from that... I have a couple of working ones here. I changed mine to LED's, but that was self-made. It's doable.

[Fujiwara]

Those are wedge-bulb LED's...

1) You need to unwrap the wires before you pull the bulbs out.

2) I have not found any pre-made bulbs that will work in those holders

Apart from that... I have a couple of working ones here. I changed mine to LED's, but that was self-made. It's doable.

The LED's came with their own holders so it is no real biggie.

Just that the T5 or T10 bulbs didn't and i don't know how to put these in.

From my understanding i am meant to solder these onto the metal connectors.

Mioght give it ago.

[Fujiwara]

UPdate:

all fixed.

Just trimmed down the holders and the base of the replacement lights.

THen just wired them up to the factory holders and screwed them back in.

Worked a charm.