Jump to content
SAU Community

Recommended Posts

hey phunky, yeah just saw the ignition dvd tonight, turned out good! and yeah you would love it there , certainly gets the blood pumping!!

hopefully we will try to get back there at the end of the year with the r34, all going okay

pauls twoogle , is one beautiful looking r32 too ! it's a credit to him.

ross, yeah, the oil to water oil coolers are great, we are seeing much lower engine oil temps now! before we were seeing up to 130 degree's!

cheers russ

I was going to bite... but.... what the hell. How could I ever compete with something like your R33 Michael. I can only dream of having the same budget, Power and Grip you do. So laugh away, Laugh at my skyline that can only have realy bad suspension geometry because it is so low. Or maybe I've read widely, spent hours making and developing my own parts to overcome the rollcentre issues and other normaly untuneable aspects of an R33.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.

i like drift, !

and our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

our next car will be on the deck, none of the cars i saw in japan (other than ours) was more than about 2/3 inches off the deck.!! awsome

like you say just need to do home owrk on geometry an so fourth.

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

Most of them don't know/care about suspension geometry, they just stick rediculous spring/shock rates in them and there is no movement, so geometry is irrelevant. Then they have to stick new super soft tyres on for every run in an attempt to mask the suspension issues.

You kicked most of their asses last year with a comparatively miniscule budget, almost zero practise and infamiliarity with the event and the circuit. Don't fall into the copy cat trap, take the technically superior high ground.

Cheers

Gary

gary you are absolutely spot on with those comments, it was the first thing we noticed with there set ups.

So yeh, it is a drift thing that forces the guys at the pointy end of drift to research, make and test stuff to get thier cars to do what they want them to do. Because after all, what happens when drifters get over drift and start to explore other avenues of motorsport???? They get laughed at by knobs who think drifters are just silly kids with way too low cars.
Yes! And if it wasn't for silly kids with low cars we wouldn't have parts like this.

photo.jpg

gtr_r_c.jpg

I mean really all they are doing is playing make-believe-GT-racer so they want their car to look like GT500 cars.

And tyres are cheap in Japan anyway, so slap in some steel rods, slam it on the ground and slip on some super softs! :(

Oh and if you get a chance run my signature (which i have had for ages) through Google Translate :D

車高の低さは知能の低さ!!!

http://translate.google.com/translate_t?langpair=ja|en

And below is my racing machine... it is slow, but fun

post-662-1207971861_thumb.jpg

Edited by Laurence

Not since I lost my licence for street drifting unfortunately... >_<

My old car had high rollcentres which is actually quite dangerous, I reckon if the roll centre is under the ground then the car can't roll above the ground! :/

post-662-1208003163_thumb.jpg

post-662-1208003174_thumb.jpg

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...