Jump to content
SAU Community

Recommended Posts

Ouch... Were you ok?

Are you going to re-shell?

yeah i was fine, very lucky. thank god i had a do-luck rear floor brace as that took most of the impact and didn't allow that section of the car to be push in so much.

Not sure if im going to re-shell or sell up and buy a GTR :) however next car will be 100% Track only, not making the same mistake twice track car = street car = major headaches and too much money

Edited by Kaido_RR
My Rally Car.

Its the 2nd car ive built for the Amsag southern cross rally series. Its a 1993 S13 Silvia with SR20DET.

I am actually disappointed im not going to Southern Mountains anymore this year. AMSAG events look like alot of fun.

Would love to know a bit more about this car, IE how you go for suspension travel etc

My team mate wants to upgrade to an EVO but I think something like this would be more fun and cheaper.

How does the s13 go on dirt?

Well compared to my 120y its unreal, but you would want to hope so lol

I am actually disappointed im not going to Southern Mountains anymore this year. AMSAG events look like alot of fun.

Would love to know a bit more about this car, IE how you go for suspension travel etc

My team mate wants to upgrade to an EVO but I think something like this would be more fun and cheaper.

They are, the class of events and the competition lately have been extremely good.

The Silvia is only a new project i finished building in April. Its done 2 events the Amsag Cowra shire rally and the Orange rally last weekend. Its still in the testing period really but has already proven itself with a couple of very competitive stage times.

Suspension travel seems fine i am actually talking to Murray Coote at the moment as to what we can do with the car because of the last event being its first proper gravel rally with big gutters and jumps the suspension i had died after the first stage. We did suspect this would happen as it was only tein superstreets with my own springs i had made and really was just a guess to get us started. Brakes i have also not upgraded as yet but already have some R32 items waiting to go on. Car is making 320hp at the rears so power is not a problem in fact its on the verge off too mutch as its hard to stop wheel spin.

Its looking to be a great little car and a lot of people are interestred in it already i suspect there will be a few more being made up sooner rather than later.

Here are a couple of in car vids from its very first event it was suffering over boost at this one so no full throttle but was still fun to drive this was fixed by a nice 38mm external gate.

They are certainly a cheaper opiton to an evo or subaru, the little SR20 so far seems a great little engine it has a nice big intercooler and a oil cooler and temps are staying within a safe level.

The car copped an absolute pounding at the last one and apart from a few big dents in the sump guard and a cracked front bar everything else seems perfect which i was pretty suprised with.

about 3 or 4 years ago I was doing a track day at oran park GP circuit there was an older gentleman there with a S13 SR20 silvia that was set-up for dirt rally. It was very standard engine wise just running boost up, ecu and exhaust. he had spent all his money on the rest of the car. had proper long travel dirt suspension (was either DMS or MCA, can't remember), had proper cage, terratrip, coms etc inside and apart from that used khumo semi's (may have been slicks). anyway I went for a few passenger laps with the guy and it was actually one of the fastest cars on the day amongst some pretty good machinery. he said it was great on dirt too. he was running around a 1:18 lap time at oran GP which was bloody fast 4 years ago especially for a silvia that would have been putting out 150rwkw max. the guy was a good steerer though too.

lovely guy, I wish I could remember his name, but he was competing with that silvia in NSW state dirt rally stuff.

Yeh keeps me smiling for sure.

BB, i can't say i have seen that one but i know of a couple around the suspension is def important in these things like all circuit/rally cars, so im looking forward to getting something decent for it.

Hi Jason,

How is Jamie and the boys down at waterhouse Auto care? I haven't dropped in to see him in ages! I must stop by with a jimmy and cola one day and catch up.

S13 looks like it has the goods mate, and Jamie has heaps of experience with both 120Y's and rallying, which I'm guessing is where you met him? Is Rae still driving his 120 or has he been back in the series?

Good luck out there mate and remember,

Stay sidewayz Kidz,

Dan.

Hi Jason,

How is Jamie and the boys down at waterhouse Auto care? I haven't dropped in to see him in ages! I must stop by with a jimmy and cola one day and catch up.

S13 looks like it has the goods mate, and Jamie has heaps of experience with both 120Y's and rallying, which I'm guessing is where you met him? Is Rae still driving his 120 or has he been back in the series?

Good luck out there mate and remember,

Stay sidewayz Kidz,

Dan.

Hey mate

Yeh i met him a few years ago with the 120y he helped me out with a few good ideas on what to do with it.

He has been a great help with the S13, Also with the tuning side of things and gave me a hand building the engine and Eddie does all the exhaust work for it.

He is doing well busy as always but always looks after me, i have seen your avatar picture on the wall there come to think of it

He isnt using the 120y much at the moment, though he did 1 event earlier this year Rae has prolly used it more than him lately lol, but more recently she has been co-driving for Ashby in an older S12 Silvia.

Thought I'd throw a few pics up of my race car....R32 GTS-t

I've been doing all the local sprints and hill climbs for the last few years including some gravel stuff and just recreantly did the car up to rally specs and raced it in my first tarmac rally which was mt stuart sprint in Townsville nrth qld. The last pic is what happens when you back it in to mt stuart at pace....I think luck was on my side....

post-25231-1277855791_thumb.jpg

post-25231-1277855864_thumb.jpg

post-25231-1277855931_thumb.jpg

post-25231-1277855975_thumb.jpg

post-25231-1277856043_thumb.jpg

post-25231-1277856215_thumb.jpg

nice GTST. I have to say that navigators foot rest is a work of art! can I ask who made that or where did you get it from? it's almost too good to rest a shoe on....almost. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...