Jump to content
SAU Community

Recommended Posts

go to the rear of the car and look under where the rear axel is. if there is a hicas lock bar in place, then thats the reason the light is continuously on. if there is no lock bar in place, then as said above, you either have low fluid or something isnt right..

if you want to drift, then get a hicas lock bar(thats if you dont already have it).. but if your going to use your car for other purposes, just leave it... it will only ever become a pain in the ass when your driving along at 110 and hicas turns on and it has a speed bump.. if anything, hicas can be a godsend if you want to take corners fast..

Edited by 180sxdrifterj
Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3241844
Share on other sites

ive been driving along at 110 one day, and hicas turned on(was travelling along the M1).. all of a sudden, had a *bump* where it felt like the left rear wheel tried to turn on a straight..

in other words, yes...

ive driven along another straight at 50 one time, and the rear wheels started turning :D stupid hicas... old technology... henceforth while a lot of skylines owners get Hicas lock bars!

Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3241879
Share on other sites

you can pick up hicas lock bars for 30-120 bucks...

i purchased mine from someone on here who makes them up with decent steel.. cost me 40 bucks if that...

installation is a sinch, yet i havent done mine as i dont have a jack and stilts :D

i would have no idea what hicas stands for, thats about it that i DONT know about hicas lol

Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3241939
Share on other sites

HICAS (High Capacity Actively Controlled Suspension)

Earlier HICAS versions used hydraulics to steer the rear wheels. The hydraulic system was powered by the power steering pump and used speed sensors to determine how much and which direction to steer the rear wheels. Later versions, called Super HICAS, moved to an electric actuator for the rear steering rack, making the system much lighter. The Super HICAS system also used its own computer to control the system instead of speed sensors. HICAS and Super HICAS rear wheel steering is limited to about 1 degree in either direction.

I just like to know why ppl here are locking them and their benefits when they do.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3243052
Share on other sites

HICAS (High Capacity Actively Controlled Suspension) is Nissan's rear wheel steering system found on cars most of their cars. Unlike other four wheel steering systems, HICAS and Super HICAS is fitted to improve handling rather than as a parking aid.

Earlier HICAS versions used hydraulics to steer the rear wheels. The hydraulic system was powered by the power steering pump and used speed sensors to determine how much and which direction to steer the rear wheels. Later versions, called Super HICAS, moved to an electric actuator for the rear steering rack, making the system much lighter. The Super HICAS system also used its own computer to control the system instead of speed sensors. HICAS and Super HICAS rear wheel steering is limited to about 1 degree in either direction.

Click here for more info:

http://en.wikipedia.org/wiki/HICAS

In short, after a certain speed you're doing - the HICAS will / should kick in to provide you with better handling and will cause the rear wheels to also turn as well on corners etc.

With my car, when I first start my engine, the HICAS light, brake lights, battery light etc flashes at the start - this is normal, but if HICAS stays on for more than a couple seconds - this means it's engaging incorrectly and needs to be fixed. I would get it fixed first before buying a vehicle with this always activated.

Good luck,

Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3243543
Share on other sites

  • 6 months later...
i have r33 4doors.since i change my steering wheel the hicas light on when i drive 10km...whats that mean n how to fix it? please help

this means the boss kit you used for the aftermarket steering wheel isn't HICAS compatible. there are little angle sensors in the steering wheel assembly and some boss kits dont work with them. best to get a boss kit the states it is HICAS compatible.

Link to comment
https://www.sau.com.au/forums/topic/177506-hicas/#findComment-3643657
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...