Jump to content
SAU Community

Vn Coilpacks On Silvertop Rb20det

Quigga

By Quigga,
in Engines & Forced Induction

 Share

Recommended Posts

Adriano Grand Master

Adriano

Posted
Posted

Just need to group the leads together, so the coils fire 1&6, 5&2, 3&4. Now that i think about it the igniter should be fine, as the bigger coils will have higher internal resistance, therefore draw less current, althouhg they would ideally want to draw it for longer(increase dwell) I cant really see the heat being a problem if you mount them on the firewall, as long as it isnt above the turbo, and as for leads being a problem, Top fuelers run leads, as long as they are good leads and mounted well there wont be a problem there. If you increase the dwell with a remap it would give a great result, but without increasing the dwell, i believe it will be a waste of time to some degree, as the spark energy in theory will be less than the stock setup in good order.

Link to comment
Share on other sites
T04GTR Grand Master

T04GTR

Posted
Posted
EDIT!!!!

ive used VN coilpacks series 2 and wired them in this fassion

post-38531-1185537877_thumb.jpg

but the problem is its sparking both leads at the same time.... does anyone know if there is a way to make them ALTERNATE or am i looking at buying series one thats proven.......

heres a link that i got the main instructions off and its all exactly the same minus the coilpacks im using are series 2 not series 1

http://www.dsd.co.nz/coils.htm

its because they are a double ended coil. lol. not an issue. thats how they are meant to run. 1-6 2-5 3-4

Link to comment
Share on other sites
Quigga Contributor

Quigga

Posted
  • Author
Posted
its because they are a double ended coil. lol. not an issue. thats how they are meant to run. 1-6 2-5 3-4

well the problem is it is missing bigtime... it sounds like its only running on 3 cyls or 4 cyls

Link to comment
Share on other sites
Quigga Contributor

Quigga

Posted
  • Author
Posted

problem solved i had the earth from the ignighter not grounded 100% so i would run fine then crap out willl post pics up 2morrow for a how too

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Count Grantleyish
      Vic Wasteland Thread - 15.0

      By Count Grantleyish · Posted

      People still have Skylines? I thought they're non-existent now. 
    • pogman
      George's R33 GTST build

      By pogman · Posted

      Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • GTSBoy
      Hello Everyone

      By GTSBoy · Posted

      They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • Triple OG
      Hello Everyone

      By Triple OG · Posted

      I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • r32-25t
      GReddy Injector Help!

      By r32-25t · Posted

      Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...