Jump to content
SAU Community

R33 Gtr With Mods

BIGPSI
 Share

Recommended Posts

BIGPSI Proficient

BIGPSI

Posted
Posted

95' R33 GTR GODZILLA Twin Turbo 4WD

Approx 100,000kms (Aftermarket Dash With 27,000kms)

R34 NUR SPEC Ball Bearing Turbos (Bigger then N1's)

Aftermarket Cams

SPLITFIRE Coil Packs

HKS Coilover Suspension

18" x 10" GOLD BBS Wheels

Brand New 275/35/18 FK452 Falken Tyres

Slotted BREMBO Brakes With Air Ducts and Air Guides

Heavy Duty Clutch (very easy to drive)

JASMA Exhaust with APEXI Hi Flow Cat

NISMO Rear Suspension Arms

HKS EVC Dual Stage Electronic Boost Controller

NISMO 320km White Dash Cluster

NISMO White Triple Guage Cluster (Front Torque, Oil Temp, Boost)

GREDDY Boost Guage

GREDDY Water Temp Guage

GREDDY Oil Pressure Guage

GREDDY Oil Temp Guage

HKS Pod Filters

Polished Oil Catch Can

Front Strut Brace

Rear Strut Brace

NISMO Clear Side Indicators

IMPUL Racing Gear Knob

Power Steering

Climate Control

Central Locking

Power Windows

Power Mirrors

Driver's Air Bag

First Owner In Australia. Serviced Every 5,000kms.

Very Good Condition. Very Quick.

Drives and Handles Very Good. Buyer Will Not Be Dissapointed. First to Drive will Buy.

$29,500 O.N.O. 0400696678

post-1382-1185090736_thumb.jpg

post-1382-1185090825_thumb.jpg

post-1382-1185090885_thumb.jpg

post-1382-1185090931_thumb.jpg

post-1382-1185090991_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/177612-r33-gtr-with-mods/
Share on other sites
BIGPSI Proficient

BIGPSI

Posted
  • Author
Posted (edited)
nice gtr mate, what if any after market ecu are you running? and how much rwkws? thanx carl.

thanks mate. running factory computer. made 280rwhp with 800Nm of torque on 16psi. but think dyno may of been out cause everyone says it goes very hard. just a good combo of turbo's and cams done in japan. factory computer richens right up on boost so is very safe. my old 33 gtr had N1's and Power FC and this one goes alot harder.

thanks.

Edited by BIGPSI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...