Jump to content
SAU Community

Recommended Posts

  • Replies 433
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

got the lines fitted last week i can acctually say there is quite a big difference in brake peddal feel

no more spongy fill to it nice and solid cheers mark very happy thanks mate.

Cheers

Allan.M

What are the brake pads like pad vs rotor wear?

The high performance pads (500 degree) are equivelent performance-wise to Bendix Ultimates, but should last roughly twice as long. The high performance pads also produce about 90% less dust then the Bendix Ultimates.

The track day pads (750 degree) can handle approximately 100 more degrees than the EBC greens. They will also last roughly twice as long as the EBC greens and have about half the wear and dust.

Obviously all these figures depend on your driving style, but these are a rough estimate.

If anyone has anymore questions, please ask.

Cheers

Mark

Braided brake Lines --- is the group buy still going?

When is the last day?

Also how long does it take for delivery?

I have track day end of nov (this month) .. so i would need it soon

Also is this a bolt on type job?

Anything else required to fit ?

cheers mate

Edited by siddr20
Braided brake Lines --- is the group buy still going?

When is the last day?

Also how long does it take for delivery?

I have track day end of nov (this month) .. so i would need it soon

Also is this a bolt on type job?

Anything else required to fit ?

cheers mate

Hi siddr20,

I'm taking orders for this GB as we speak. GB closes at the end of this month.

Hoses are generally being shipped the day after payment is received.

These are a direct replacement for your old hoses, so just take off the old ones and put the new ones straight on.

All you'll need to do is bleed the brakes slightly once you put the new hoses on. Fairly easy to do.

If you have anymore questions, just ask.

Cheers

Mark

Hi Mark,

i see now you have the Stagea fronts for the braided brake lines. Are they the same as the R33Gtr? how about the rears? Is the stagea for a RS4s or 260rs? Will they be the same? Let me know.

Do you have anything for the the pads? Its equilvalent to the R33GTR brembos.

Hi Mark,

i see now you have the Stagea fronts for the braided brake lines. Are they the same as the R33Gtr? how about the rears? Is the stagea for a RS4s or 260rs? Will they be the same? Let me know.

Do you have anything for the the pads? Its equilvalent to the R33GTR brembos.

Hi stasis,

From memory, from what BrakeWest said, the hoses are similar to the 33 GTR. The rear hoses are a pain in the a$$, that's why BW aren't doing them. It involved changing changing some fittings on your car from imperial to metric and was more trouble then its worth. This was all for a 260RS, not sure about the RS4.

For pads, BW don't have anything available for Brembo systems unfortunately. I was using the K750's with my standard GTR brakes, but since i put Brembo's on the car, I've had to settle for EBC's.

Cheers

Mark

Hi stasis,

From memory, from what BrakeWest said, the hoses are similar to the 33 GTR. The rear hoses are a pain in the a$$, that's why BW aren't doing them. It involved changing changing some fittings on your car from imperial to metric and was more trouble then its worth. This was all for a 260RS, not sure about the RS4.

For pads, BW don't have anything available for Brembo systems unfortunately. I was using the K750's with my standard GTR brakes, but since i put Brembo's on the car, I've had to settle for EBC's.

Cheers

Mark

ok thanks

Hi stasis,

From memory, from what BrakeWest said, the hoses are similar to the 33 GTR. The rear hoses are a pain in the a$$, that's why BW aren't doing them. It involved changing changing some fittings on your car from imperial to metric and was more trouble then its worth. This was all for a 260RS, not sure about the RS4.

For pads, BW don't have anything available for Brembo systems unfortunately. I was using the K750's with my standard GTR brakes, but since i put Brembo's on the car, I've had to settle for EBC's.

Cheers

Mark

ok thanks

Hi stasis,

From memory, from what BrakeWest said, the hoses are similar to the 33 GTR. The rear hoses are a pain in the a$$, that's why BW aren't doing them. It involved changing changing some fittings on your car from imperial to metric and was more trouble then its worth. This was all for a 260RS, not sure about the RS4.

For pads, BW don't have anything available for Brembo systems unfortunately. I was using the K750's with my standard GTR brakes, but since i put Brembo's on the car, I've had to settle for EBC's.

Cheers

Mark

ok thanks

Hi stasis,

From memory, from what BrakeWest said, the hoses are similar to the 33 GTR. The rear hoses are a pain in the a$$, that's why BW aren't doing them. It involved changing changing some fittings on your car from imperial to metric and was more trouble then its worth. This was all for a 260RS, not sure about the RS4.

For pads, BW don't have anything available for Brembo systems unfortunately. I was using the K750's with my standard GTR brakes, but since i put Brembo's on the car, I've had to settle for EBC's.

Cheers

Mark

ok thanks

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...