Jump to content
SAU Community

4 X 12in Subs


randyhee
 Share

Recommended Posts

Lol... What sub are they? Sell two and spend the money elsewhere... sound deadening? more powerful amp? custom tuned sub box? sell all four buy two better subs?

Link to comment
Share on other sites

oh and i have four mono blocks to run them there jaycar ones i just need help to put them in i have been f**ked over so many times with this car i wanna try do as much as possible on my own and i also need so input on were i could but my bottle thanks ppl

Link to comment
Share on other sites

there four alipine type r subs and what do u mean its to many its for my show car

oh show car!

that make sense then...lol sorry mate

i thought its only for music.... didnt even think about show...lol good luck for the show bro

Link to comment
Share on other sites

There is not enough room in the boot of a R33 to make 4 x 12 inch subs sound good.

But if sound does not matter and it is purely for looks, just make a frame that supports the 4 subs in the position that you want them and work from there. You will have to make a box out of wood and fibreglass.

Good luck making it all fit, I have 2 x 12 inch and an amp and it pretty much takes up the whole boot.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...