Jump to content
SAU Community

Recommended Posts

I have a Nismo catback with EVC on it.

Just wondering.

Is this 3" piping?

How much power is this good for?

If it is similar to aftermarket exhausts in terms of performance, was thinking of just getting a dump pipe instead of the whole exhaust.

Tried a search but couldn't find much info..

Link to comment
https://www.sau.com.au/forums/topic/177752-info-on-nismo-catback/
Share on other sites

the sound is just right.

but i am going to chase some more power soon and i was wondering if the exhaust would be th weakest link.

If it isn't, i'll most likely get a front + dump pipe.

If it restricts power...then i'll get the whole system.

Measure up the size of the exhaust..give some specs on here..then you will get some more info.

Without sizes and specs..it is hard to tell you if it is good for further power upgrades or restrictive

Take care

I had the nismo cat-back aswell, the one that sways nissan sports muffler on the tip & has the sport & silent switch in the cabin.

Pretty sure the piping is 2.5" from memory, It's still in my garage so I'll have a look later

There will be more of a restriction from the dump & engine pipe through to the cat more than the cat back section.

I now have a full 3" system on mine & it's not that much louder than the nismo one on idle, just a deeper note. Absolutely growls when accelerating.

I have a 3" split dump pipe bolted to a 3" JIC magic engine pipe, an X-force hi-flow cat & the HKS hi-power silent cat back.

I noticed a slight pick-up in mid range grunt, but it's the top end where I really noticed the change, it didn't feel as 'choked' as before.

I have a 3inch nismo catback and I dont see how its different from the other aftermarket performance exhaust. I am still running on the stock dump and front pipe and hence wouldnt be able tell the diff a full exhaust makes..

I have a Nismo catback with EVC on it.

Just wondering.

Is this 3" piping?

How much power is this good for?

If it is similar to aftermarket exhausts in terms of performance, was thinking of just getting a dump pipe instead of the whole exhaust.

Tried a search but couldn't find much info..

Ok

Here is your answer..BANG FOR BUCKS

Turbo...computer..electronic boost controller .dumps..tune

If you have these

then new cat 3"Metal(free flow type),Z32 AFM,3 inch exhaust cat back.

How much power are you chasing?....And what Mods do you have?

Think of the World of Turbo's as a World of compressed air...the more you force through the better the power results....

So..Pods...New AFM...Z32 in your case..Larger front mount Inter-cooler,Better turbo,dumps,front pipe,free flow cat,exhaust..non restrictive.

(A QUOTE BRUCE LEE WOULD HAVE BEEN PROUD OF)

Then,fuel supply,fuel delivery(injectors)...tune.

Which part are you up to?

i am up to the stage you first mentioned.

Looking at a new turbo (HKS GTRS or Gt2835proS)

HPI Dump + Split front pipe

PFC

550cc Nismo injectors + Tomei/Nismo fuel Pump

Z32 AFm

Sard 200cell 3" CAT

Maybe fuel reg

Already have FMIC + POD + EBC

Just need to know if i need to replace the catback section.

How do i measure the piping? Is it from the outside end to the other side(outside)? Or do i have to measure the internal diameter?

i am up to the stage you first mentioned.

Looking at a new turbo (HKS GTRS or Gt2835proS)

HPI Dump + Split front pipe

PFC

550cc Nismo injectors + Tomei/Nismo fuel Pump

Z32 AFm

Sard 200cell 3" CAT

Maybe fuel reg

Already have FMIC + POD + EBC

Just need to know if i need to replace the catback section.

How do i measure the piping? Is it from the outside end to the other side(outside)? Or do i have to measure the internal diameter?

If its not 3 inch..........change it.....that is all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...