Jump to content
SAU Community

Breaks Problem

iMessenger
 Share

Recommended Posts

iMessenger Enthusiast

iMessenger

Posted
Posted

Theres a problem with my brakes in my Skyline, which i bought 2 weeks ago. 1st week of running it was fine, but now at slow speeds the breaks make a very loud screeching sound. I will hopefully be able to take it to the ppl who had a look at the car before sale to make sure everything is OK. Does anybody know what the problem could be?

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/
Share on other sites
ssshonky Grand Master

ssshonky

Posted
Posted

most probably just worn pads. The screeching noise is there by design to advise you the pads need changing. If your thinking about upgrading your rotors ( say to slotted ) now is an idea time to change them , as your going to need to remove the calipers to put the pads in

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3248566
Share on other sites
iMessenger Enthusiast

iMessenger

Posted
  • Author
Posted
Hmm i had the same problem with my old 33, i put bendix ultimates in they were so noisy, mechanics could not quite them down, so i had to change them to a softer compound.

Thanks. hmm that must be the problem then, so a softer compound i take it is working fine then?

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3249286
Share on other sites
MAYHEM Contributor

MAYHEM

Posted
Posted

Softer compounds will also generate shitloads of dust for your rims. Sometimes shit (such as tiny stones etc) get in between your rotors and pads which will also generate noise, just give it a quick clean with a big pressure hose or something. It helped on my brothers rexie.

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3249893
Share on other sites
Modena Grand Master

Modena

Posted
Posted
Softer compounds will also generate shitloads of dust for your rims. Sometimes shit (such as tiny stones etc) get in between your rotors and pads which will also generate noise, just give it a quick clean with a big pressure hose or something. It helped on my brothers rexie.

Ultimates are dusty as anything...

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3250344
Share on other sites
iMessenger Enthusiast

iMessenger

Posted
  • Author
Posted

Thanks for all the responses guys..

The pads are new, so its not due to any wear/tear, just that they are racing pads with a hard compound. I could get the softer compound, yet it will get dusty as ppl have pointed out, so yeh.

I decided to give it to the mechanics, they said they will sand it and apply some goo and said that it should reduce the noise, yet there is no guarentee of it not reccuring in the future.

Anyways im glad to know that it is a common occurance and that there is nothing wrong with the brakes. :P

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3251004
Share on other sites
95SKY Community Regular

95SKY

Posted
Posted
Thanks for all the responses guys..

The pads are new, so its not due to any wear/tear, just that they are racing pads with a hard compound. I could get the softer compound, yet it will get dusty as ppl have pointed out, so yeh.

I decided to give it to the mechanics, they said they will sand it and apply some goo and said that it should reduce the noise, yet there is no guarentee of it not reccuring in the future.

Anyways im glad to know that it is a common occurance and that there is nothing wrong with the brakes. :P

Good luck hope you sort it out. :)

Link to comment
https://www.sau.com.au/forums/topic/177990-breaks-problem/#findComment-3251182
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 GTS (RB20DE) clogged cat

      By MBS206 · Posted

      The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Duncan
      3D printing fun

      By Duncan · Posted

      Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • Duncan
      R32 GTS (RB20DE) clogged cat

      By Duncan · Posted

      I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
×
×
  • Create New...