R34 Gtt Wheel Offset

[Jsikalias]

hi everyone

i currently have 19inch lenso LS5 on my car and i have decided to sell them the offset is 35 all round but at the front i needed spaces to clear the caliper now the new wheels i want to get are the BUDDY CLUB P1 RACING II PLUS 19" RIMS can someone please help me choose which offset is correct for my r34 gtt i have attached a chart.

[G_Force]

hi everyone

i currently have 19inch lenso LS5 on my car and i have decided to sell them the offset is 35 all round but at the front i needed spaces to clear the caliper now the new wheels i want to get are the BUDDY CLUB P1 RACING II PLUS 19" RIMS can someone please help me choose which offset is correct for my r34 gtt i have attached a chart.

See sticky above. Nice rims btw.

[adam-__-]

How wide do you want to go mate? Front and rear?

[Jsikalias]

not too wide maybe 8 or 8.5 i dont want the wheels to stick out of the gaurds...

i have looked at the sticky above it didnt help me

Edited July 25, 2007 by Jsikalias

[Jsikalias]

would it be a 30 offset since my lenso ones are 35 and i need a 5mm spacer to clear the caliper?

[adam-__-]

Wheels sticking out of the guards will depend mostly on the offset of the wheels. In my opinion, go for the widest you can go. But I'll look and see what offsets you'll need with 8 and 8.5" wheels.

[adam-__-]

How wide were your old wheels?

[Jsikalias]

8

[Jsikalias]

thanks for helping me out

[adam-__-]

Yeah, if you're happy with the way your old wheels sit with the spacers on, you should get +30 offset for the front. It should sit in the exactly the same position. And for the rear.....

[Jsikalias]

as long as im not using spacers im happy where it sits

[adam-__-]

How much gaurd clearance do you have for the rear with your old wheels?

If you go 8.5" wide with an offset of +22, just imagine your wheels now but sticking out an extra 20mm.

[adam-__-]

If you're happy with the way your wheels are now, just go for 8.5" rear with an offset of +38. It'll be sticking out an extra 3mm from what it is now.

[Jsikalias]

its perfect with 35 offset at the rear but if i go any lower i need to roll the lip in so i dont want it to stick out 20mm :S

[adam-__-]

Just go for the +38 on the 8.5" wide. It'll stick out an extra 3mm.

[Jsikalias]

ill go check if 3mm extra will sit in the gaurds

[Jsikalias]

yeh there is room for an extra 3mm... thanks adam

[adam-__-]

No worries. Hopefully it all goes well.

[adam-__-]

Just incase you wanna check out different offsets for yourself, have a look at this site:

http://www.1010tires.com/WheelOffsetCalculator.asp

Cheers