Jump to content
SAU Community

R32 Gtr 4wd Light On

Rychous
 Share

Recommended Posts

Rychous Newbie

Rychous

Posted
Posted

Help! Trying to work out what the hell this is.....

Computer says ETS pressure switch, have rang all the Import wreckers in WA, and no one seems to either have one or know anything about it. (It doesnt help that a lot of them have limited english, and I never paid attention to a second language in school.)

Basically I dont have 4WD at all, which although this is a lot of fun at times, its also a tad scary. Anyone have any ideas? I have read thru the forums, but cant find anything to do with this. I'm assuming this is what caused the leak of fluids from the back of the car. (initially I thought it was just a leaky back diff.)

Also my hicas light comes on intermittently, could these two things be related or are they seperate issues?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/178031-r32-gtr-4wd-light-on/
Share on other sites
  • 2 weeks later...
Rychous Newbie

Rychous

Posted
  • Author
Posted

Your spot on. looks like its the pressure switch. How do I go about soucing a replacement? Nissan wants a sh%% load for a new one, any other suggestions anyone? Exactly what is it I need to buy and replace?

Tell you what, might be a lot of hassle, but its worth it.... :) I'm sure with the amount of feeding fines I have paid the government will agree....

Anyone able to help me and the government get my baby back on the road?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Wont start unless i have the pedal to the floor

      By GTSBoy · Posted

      Look to cold enrichment then?
    • GTSBoy
      R34 RB20DE NEO + T ONLY

      By GTSBoy · Posted

      See my post here If you put the Haltech in, you won't have to worry about any of that. And, in case you're worrying about my lack of credentials in doing your exact swap, I put a Neo in an R32. There has never been a stock boost solenoid near my car and the Neo's ECU has never cared. Nor should it, because it is electronically impossible for it to care.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      That's 100% wrong. Did you wire in the boost sensor? If you did not, then that is 101% your answer. Neo ECUs do suck a bit.
    • Sxnjeet
      R34 RB20DE NEO + T ONLY

      By Sxnjeet · Posted

      Hello, I'm trying to make this thread basically the thread with all the answers to common questions regarding specifically the RB20 DE NEO + T engine, that comes in the R34. Answers will and only should be provided by those who have done this conversion or actually have some relevant real life experience please. Please feel free to ask questions in the comments if you have any so other members can answer. I feel like this thread is really needed, especially with more Americans buying (unknowingly going to regret it too) rb20 neo r34s. My first question being - What do you guys use for tuning? I have purchased a haltech elite 2500 Plug and play kit for the rb25det NEO because the ecu plug is the same, but I am unsure if any of the pins would need to be repined to match. Second question that I see asked very often - After this conversion, did you install the boost solenoid/ actuator? I see many people doing a + T setup on their rb20 NEOs while running stock RB25DET NEO ECUs with no tune. I am wondering how they are going about doing that and consistently abusing the car because many of these people have had these untuned setups running for a very long time. That was my original plan, but my engine cuts out at 5 psi of boost using the stock ecu with no tune and no boost solenoid/actuator.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      interesting. ive read and heard otherwise over the past year. ive been doing this +t conversion on a rb20 neo using all oem rb25det neo parts including the ECU, and im having engine cut out issues when I hit around 5 psi of boost. Everywhere/everyone ive asked has told me its because I never wired in a boost solenoid/actuator to the ecu, so the ecu isn't getting the right signal once it hits 5 psi of boost, causing the engine to get shut off.
×
×
  • Create New...