Jump to content
SAU Community

Safc1 Vs Safc Ii

abu

By abu,
in Engines & Forced Induction

 Share

Recommended Posts

abu Grand Master

abu

Posted
Posted (edited)

Hey

I've been searching for a while now and keep coming up with the same old descriptions and specifications

I just want to know what the main differences are between SAFC1 and SAFC2.

I presume the SAFC2 has more load points and obviously looks different so the SAFC1.

Can someone post up some specifications..

Would you say the SAFC1 is now outdated and best to go SAFC2? I am having trouble finding one at a reasonable price and have bought an SAFC1 now.. but not sure if i should use it or what.

I mean, if there is a major different between V1 and V2, then yeah, but if its the same shit then I will just use SAFC1.

I am also referring to the blue screen SAFC, not the ancient dial version :pirate:

Don't know how much of that makes sense, I'm pretty tired, hungry and out of it, lonnnng day today..

Thanks in advance,

Abu

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/178097-safc1-vs-safc-ii/
Share on other sites
R33silverS2 Mentor

R33silverS2

Posted
Posted

Basically the SAFCII has a knock sensor and the extra load points and a scroll wheel instead of 4 buttons. In the end they will get the same result - dunno how much the few extra correction points make to real world performance as the safc creates a smooth curve between points. The monitor mode may be different as well but essentially the same. I just bought the number II cos i wanted one brand new with manual etc - and for the knock but i dunno how accurate the knock readings are anyways.

SECURITY Grand Master

SECURITY

Posted
Posted

safc1 has 8 correction points that can be adjusted in 500rpm increments. thats about all it does.

safc2 has 12 correction points that can be adjusted in 200 rpm increments and has the ability to run 2 maps (usually 1 tuned, and the other standard) and it has the ability to minitor knock.

safc NEO has 16 correction points, VTEC controller built in (i.e. VAFC built in) as well as all the features the safc2 has but has a colour display that kind've turns me on.

abu Grand Master

abu

Posted
  • Author
Posted (edited)
  SECUR1TY said:
safc1 has 8 correction points that can be adjusted in 500rpm increments. thats about all it does.

safc2 has 12 correction points that can be adjusted in 200 rpm increments and has the ability to run 2 maps (usually 1 tuned, and the other standard) and it has the ability to minitor knock.

safc NEO has 16 correction points, VTEC controller built in (i.e. VAFC built in) as well as all the features the safc2 has but has a colour display that kind've turns me on.

That is the answer I was looking for.

So 2 maps, 1 standard. So pretty much you can switch the SAFC2 off and you will be running off standard ECU.

SAFC NEO with the 16 points is another advantage, as well as the SAFC2 features..

Although I am just looking for something basic to do the job, so SAFC2 would be good, because I would like to have 2 maps, standard boost and high boost would work?

Time to weigh up prices and see whats available!

Thanks for your help man, much appreciated.

Abu

Edited by abu
R33silverS2 Mentor

R33silverS2

Posted
Posted
  SECUR1TY said:
safc1 has 8 correction points that can be adjusted in 500rpm increments. thats about all it does.

safc2 has 12 correction points that can be adjusted in 200 rpm increments and has the ability to run 2 maps (usually 1 tuned, and the other standard) and it has the ability to minitor knock.

safc NEO has 16 correction points, VTEC controller built in (i.e. VAFC built in) as well as all the features the safc2 has but has a colour display that kind've turns me on.

Neo also has no knock sensor.

SECURITY Grand Master

SECURITY

Posted
Posted

the knock sensor on my safc2 was a life saver. i turned timing over a bit too much, i saw it hit 99 then started to hear a little pinging AFTER.

i set it to flash if it went over 40 knock, otherwise i would've have known and blown my motor to bits..... again.

abu Grand Master

abu

Posted
  • Author
Posted (edited)
  SECUR1TY said:
the knock sensor on my safc2 was a life saver. i turned timing over a bit too much, i saw it hit 99 then started to hear a little pinging AFTER.

i set it to flash if it went over 40 knock, otherwise i would've have known and blown my motor to bits..... again.

Hahaha lucky hey.

Hard to find a SAFC II for sale, been looking pretty hard..

What mods you got and how much power you making with the SAFC II?

Thanks,

Abu

Edited by abu
abu Grand Master

abu

Posted
  • Author
Posted

OK so I got me an SAFCII but the whole thing is in Japanese, as it would be lol

Anyone have a English manual for one of these by any chance?

http://www.skylinesaustralia.com/forums/in...showtopic=85232

Thats the DIY I found on doing the installation so I will be following that.

Also just want to know how to set it up to run stock fuel map until I up the boost and can take it to a dyno to get it tuned?

Thanks,

Abu

SECURITY Grand Master

SECURITY

Posted
Posted

in one of the menus there will be an option to "initialise". that will delete all data that has been input into the unit.

i recommend doing that and starting from scratch.

OR you can scroll through and find "file select" or something like that. this will allow you to choose between the 2 data files by going to the column which says "ON OFF" and pushing the joystick up or down to select.

this is all off the top of my head so follow it only as a general guide.

Birnie Veteran

Birnie

Posted
Posted

You can have it all prepared/installed as in have it clipped, femal/male plugs attatched and then plugged back into the original position. All powered up and running too.

Then when ready to tune, just unplug that 1 wire and re-route the signal to go thru the SAFC unit.

If you use the plugs supplied, no further soldering will be required to make the signal go thru the unit or back to the original position.

It'll make sense when you are doing it, I'm crap at decribing it at 5am.

abu Grand Master

abu

Posted
  • Author
Posted
  SECUR1TY said:
in one of the menus there will be an option to "initialise". that will delete all data that has been input into the unit.

i recommend doing that and starting from scratch.

OR you can scroll through and find "file select" or something like that. this will allow you to choose between the 2 data files by going to the column which says "ON OFF" and pushing the joystick up or down to select.

this is all off the top of my head so follow it only as a general guide.

Thanks for that man. Will have a better look now that I am half awake and sort of know whats going on.

Abu

abu Grand Master

abu

Posted
  • Author
Posted
  Birnie said:
You can have it all prepared/installed as in have it clipped, femal/male plugs attatched and then plugged back into the original position. All powered up and running too.

Then when ready to tune, just unplug that 1 wire and re-route the signal to go thru the SAFC unit.

If you use the plugs supplied, no further soldering will be required to make the signal go thru the unit or back to the original position.

It'll make sense when you are doing it, I'm crap at decribing it at 5am.

Are you saying plug the male and female plugs that go into the AFM into them selves?

Thanks,

Abu

R33silverS2 Mentor

R33silverS2

Posted
Posted

Once you install the safc it will just run the stock fuel map because no correction has been applied to the load points. You can have it fully installed and driving around and all it will do is display values such as throttle, air flow, knock etc. If you install a brand new safc it is fine to drive around with it untill it gets tuned because it hasn't changed anything. Otherwise if it is used just check that in the 'settings' onder 'high throttle' and 'low throttle' everything is on zero correction and you will be sweet to drive. Don't have to worry about disconnecting it etc. :)

Fry_33 Proficient

Fry_33

Posted
Posted
  abu said:
OK so I got me an SAFCII but the whole thing is in Japanese, as it would be lol

Anyone have a English manual for one of these by any chance?

Thanks,

Abu

Go to www.apexi.com.

Select the picture on the left (America)

Select 'Support' at the top right of screen

Select 'Installation Manuals'

Select 'SAFC II Instuctional Manual (401-A911)'

That might be what you're after

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Keeper
      SAUNSW - World Time Attack Challenge - 5 & 6 September

      By Keeper · Posted

      Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
    • Keeper
      Mid week Palm Beach Cruise

      By Keeper · Posted

      This is going to be a mid week evening cruise. Come along and join us for a drive out to Palm Beach. This is a change of event plans after talking to some of the older members of the club. SAU NSW is planning on hitting Old Pac again shortly, stay tuned for details. When: Thursday 26th of June Time: 7:30pm meet/8:00pm departure/10:00pm finish Meet: Spit West Car Park / Spit Rd Mosman NSW 2088 Destination: Palm Beach Public Parking / 16 Ocean Rd Palm Beach NSW 2108 Up to date information as always can be found on the events page of our website, the link for this event is https://www.saunsw.com.au/events/palm-beach-cruise There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • niZmO_Man
      Rusty roof repair

      By niZmO_Man · Posted

      Good time for a carbon roof  
    • GTSBoy
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By GTSBoy · Posted

      Not in any way aroused by any of those, except maybe the big AMGs. And that would break my never a Euro, ever, rule.
×
×
  • Create New...