Jump to content
SAU Community

Targa Tasmania Question

padey

By padey,
in Motorsport Discussion & Builds

 Share

Recommended Posts

padey Community Regular

padey

Posted
Posted

Hi all.

For those of you who have competed in Targa Tasmania, what was involved in preparing your car?

I'm investigating competing in Targa Tassie 08 in the rookie rallye section and just need to work out the costs of preparing my current road going car.

I guess i need a half roll cage, driver+navigator harnesses, toe hooks front and rear.........

Any info would be great.

ap

Link to comment
https://www.sau.com.au/forums/topic/178133-targa-tasmania-question/
Share on other sites
WogsRus Veteran

WogsRus

Posted
Posted (edited)

Ok well if you go to the targa page, there is a requirament list.

We competed in Targa Rookie Classic Class C.

We needed:

Fire extuinguisher

Battery cut out

Fuel Cut out if fitted with electronic pumps

Role cage, Cams approved with papers, seamless tube, all bent and wealded as per the rules

Fire suits, gloves and face mask, ADR approved helmett.

You need a first aid kit

Triangle for breakdowns

Tow points in red, indicated with a sticker

These are the main have toos

Then thre is a whole heap more, like battery triangle stickers, they give you those, tiedowns for any loos items, Terra trip is not required at all. MAKE SURE You have good pace notes, we didn't and crashed. LOL.

Your car needs to be registered and road legel, well roar registered under special interest at least, so all lights must be functioning ect.

Edited by WogsRus
sav man Grand Master

sav man

Posted
Posted

You need a minimum of a 5 point harness (and remeber to have it realy tight, or your balls get mashed), there's rumers going around that bolt in cages mightn't be accepted soon, but that is only a rumer. But if you do it, put a weld-in in, it's worth it if you do crash.

how many mods does your car have? because the cars are mostly standard parts.

The targa site has all the regs up, and a link to the cams technical regs.

Duncan Grand Master

Duncan

Posted
Posted

What you need more than anything...is a car you can thrash for 3 days without it breaking down in any way....so have a think about what sort of condition everything is in and what you might need to replace. Like Ben said it has to be pretty much standard too so you might have to remove bits you already have.

Cage is probably the hardest thing - you can get a bolt in one so you can remove it, but it needs to be a full cams compliant one - think $1500min.

t01-100 Mentor

t01-100

Posted
Posted
Was your wedding photo in the paper the other day Stu?? It was a Stuart Benson and looked a bit like you....but it might've been a funny angle and I wasn't sure.......

Yes mate that was me, obviously Kylie is a very lucky girl!

The photographer wanted to use that shot for promo and I wondered where it was going to show up.

Duncan Grand Master

Duncan

Posted
Posted

grr we ordered and paid for a party dvd at the same time we ordered the offical one.....neither has arrived yet - I know the offical one is delayed but its really the party tape should be here by now :)

Kel Veteran

Kel

Posted
Posted
grr we ordered and paid for a party dvd at the same time we ordered the offical one.....neither has arrived yet - I know the offical one is delayed but its really the party tape should be here by now :D

ummmm did I forget to tell you I told the guys to send the DVDs together.... :P

t01-100 Mentor

t01-100

Posted
Posted

sav_man - Yeah I think we've still got some, will check.

Duncan& Kel - They will both be worth the wait!

The DVD would have been released sooner as dat16 and the SCTV team finished them some time ago, but they all arrived back from production with the wrong covers and these had to be printed.

dat16 Rookie

dat16

Posted
Posted

In regards to the party DVD's I have located the source here at work and can supply copys at the nominal fee of Twenty dollars.....

We can also do packages that include all shots of you'r vehicle compiled, along with a personalised party tape version that has shots of you'r vehicle inserted into it....

Obviously there is more cost involved in the vehicle compile's and party tape inserts. Those that may be interested will need to contact me for details... I personaly have done many compiles and they can take anywhere from 1/2 an hour to 2 hours depending on how many shots you have to locate.....I think there is somewhere in the vicinity of 70 to 80 tapes from this year!!!!!! :action-smiley-069::(

I am at you'r service.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      You will need to extend the turbo inlet pipe somehow, which could/might be done with silicone/rubber pipe, but might need steelwork, depending on your intake. And you will need to change the pipework on the outlet in teh same way, but this is more likely to need steelwork.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      I see... Any idea how much fab work is required? I note the Hygear megathread but its like 900 pages
    • joshuaho96
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By joshuaho96 · Posted

      I should try the experiment you're talking about, the throttle switch is still there carried over from the R32 and it's still all wired up but after I did the whole intake manifold refurb and had to recalibrate the TPS I managed to somehow get the idle switch reporting activation at 0.22V, then when I adjusted it to 0.45V for idle it decided the engine was permanently no longer idling which caused some very weird behavior, closed loop idle was disabled so it would basically be at the whims of the cold start valve and whatever the base timing table was at. Then just unplugging/replugging the TPS with the ECU live caused it to relearn the idle TPS position and decide 0.45V was idle. Presumably there's nothing in the TPS that allows for the throttle switch to "recalibrate" like that, not easily at least.
    • dbm7
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By dbm7 · Posted

      Duh... to answer my own silly question, it's actually described in the FSM... ...400 pages away at the end of the manual, for RB25DE/DET signal descriptions, it cites the TPSwitch signal action, is dependent on the TPSensor value ~ this tends to infer the builtin POT voltage signal is the primary, and the switches are fallback/secondary should the POT fail/TPSensor signal lost (and switch alone with no TPSensor signal allows for base idle speed setting).... makes sense... they (TPS units) used to fail/wear the POT with time, they're not exactly built to last ~ having the switch as a redundancy gets around this...(or, it's less likely both signals would be lost as they're on different power rails)... and of course wrt RB26DETT, you have to electrically disconnect the IACV solenoid from the harness, to defeat idle air control...  
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      Dose is unaware just how much fun 145-150kw would be in a 2.5L NC MX5. It would be one of the most fun things to drive to ever grace SAU.
×
×
  • Create New...