Jump to content
SAU Community

Rb20det Motor Package

gaffa20882
 Share

Recommended Posts

gaffa20882 Enthusiast

gaffa20882

Posted
Posted

Hey all,

I have a RB20det from a R32 (4-door)

Was never boosted, or thrashed and was serviced every 5000k's

Was going to be put into my HR31 coupe, but changed plans.

Has 132XXXk's, comes with 2 harnesses and a ecu (no AFM thou)

Also comes with:

Rebuilt R32 5-speed g/box

Exedy h/duty clutch (only had about 500k's done on it)

Nismo h/duty pivot fork mount

Recently machined flywheel

Has had timing belt and water pump done at 120XXX's

Comes with a genuine Nissan water pump and Gates h/duty timing belt (both brand new)

Comes with a FMIC (think pwr brand, no piping thou)

Injectors recently cleaned

Brand new NGK platnium plugs

Rocker covers are a red colour (similar to the R34 GTR ones)

Also comes with spare clutch and flywheel (unknown clutch)

All this is in victoria, can send interstate but buyer has to organise it

Looking for around the 1500$ mark, pst me or ring me on 0439481838

Thanks (if you want any pics just pst me)

Link to comment
https://www.sau.com.au/forums/topic/178227-rb20det-motor-package/
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • hfygrte52
      R33 GTR tail light

      By hfygrte52 · Posted

      i need a complete tail light for my R33 GTR if you have please let me know.
    • hfygrte52
      Needs

      By hfygrte52 · Posted

      I need a great maintenance workshop around Idaho, if you know one please let me know..
    • hfygrte52
      Need 1993 GTR

      By hfygrte52 · Posted

      Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • hfygrte52
      Hello friends

      By hfygrte52 · Posted

      I'm mark from Idaho.
×
×
  • Create New...