Jump to content
SAU Community

Recommended Posts

ok guys just a quicky i am about to put my engine inn, and have decided to scrap the standard power fc and AFM's for something that will run a map sensor.

i am looking at either

Power FC d-jetro

or

Autronic

i will be running a single t51r on a rb26, with blitz 700 injectors.

i have used the power fc before and relly like the idea of having all the info there on the hand controller, where as the autronic is simply laptop material.

what are your thoughts, any one ever used a autronic on a rb26 before anyway??

Link to comment
https://www.sau.com.au/forums/topic/178251-ecu-recomendations/
Share on other sites

How about a MICROTECH or WOLF V500?

They both have hand-controllers so you can view all the live info straight up and they can also both be tuned via HC.

Both can hold multiple maps, so you can switch between say a street tune and a economy tune.

In most cases if a tuner can tune one, eg: Microtech, they can usually tune the other!

They also both use MAP sensors.

V500 has up to a 30PSI internal MAF, and you can get larger external ones.

Only disadvantage is they are not plug and play, but universal units aren't that expensive anyway.

Microtech is pretty popular with a lot of the drag cars and rotary's, they run big power.

Haltech is pretty popular too, but not to sure on the specifics, maybe someone else can comment on that.

Hope that helps in some way.

More info from links below;

http://www.microtech-efi.com/

http://www.wolfems.com.au/

Thanks,

Abu

Edited by abu

run a microtech me self, in both cars, VL turbo(400rwhp) and the skyline which is virtually stock. Chris Dalton from Dalton automotive in Geelong Vic tunes the cars and they have proved to be an out standing unit especially with chris's years of experience in tuning them. i personally would go the microtech way! plenty of quick rotors with them, but there is also a alot of hell bent quick piston power machines out there with them too !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It still combines inches with mm, especially when you have .5 inches involved, and mm and inches that can go in either direction. This would give a clear idea on both sides of the rim, right away, with no arithmetic. Even better if somebody gives you the dimensions of the arch of multiple cars. i.e GTR may be 125mm, a A80 Supra may be 117mm, or something along those lines. Yes, you can 'know' that going from a 10in rim to a 10.5in rim with the same offset moves both sides about 6mm, but you still have to 'know' that and do the math. Often it's combined. People are going from 9.5 +27 to 10.5 +15. You may do the math to know it, but if it was going from (I had to go look it up to be sure) 241mm/2 - 27 - 93.5mm from the center line to (more math) 266/2 - 15 (118mm) from the center line. Versus 93mm vs 118mm. It's right there. If you know you have a GTT with 100mm guards you can see right away that one is close to flush and the other absolutely won't work. And when someone says "Oh the GTR is 120mm" suddenly you see that the 10.5 +15 is about perfect. (or you go and buy rims with approximately 118mm outward guard space) I think it's safe to say that given one of the most common questions in all modified cars is "How do offsets work" and "How do I know if wheels will fit on my car" that this would be much simpler... Of course, nothing will really change and nobody is going to remanufacture wheels and ditch inches and offset based on this conversation :p We'll all go "18x9+30 will line up pretty close to the guards for a R34 GTT (84mm)" but 'pretty close' is still not really defined (it is now!) and if you really care you still have go measure. Yes it depends on camber and height and dynamic movement, but so do all wheels no matter what you measure it for.
    • But offsets are simple numbers. 8" wheel? Call it 200mm, near enough. +35 offset? OK, so that means the hub face is that far out from the wheel centreline. Which is 2s of mental arithmetic to get to 65mm to outer edge and 135mm to inner. It's hardly any more effort for any other wheel width or offset. As I said, I just close my eyes and can see a picture of the wheel when given the width and offset. That wouldn't help me trust that a marginal fitment would actually go in and clear everything, any more than the supposedly simple numbers you're talking about. I dunno. Maybe I just automatically do numbers.
    • Sure! But you at least have simple numbers instead of 8.5 inches +/mm, relative to your current rims you do maths with as well, and/or compare with OEM diameter, which you also need to know/research/confirm..
    • Uniclutch install vid, RB Track edition.   Highlight reel is very drive able, not noisy but still heavy with the clutch master he has.      
×
×
  • Create New...