Jump to content
SAU Community

Recommended Posts

hey guys. just wondering on what goes on, on resealing rear windscreen on a 32 cause the guys that did it before just took the seals out and just filled the gap in with sugaflex. now they are saying that the windscreen has to be pulled out then resealed. now i am just confused cause this was just a half finished job. could ya guys help me out here got the pic attached

thanks

post-25174-1185505002_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/178304-windscreen/
Share on other sites

yeah from da looks of things.... ur rite gonna have 2 pull it out and re-seal it....!!!!!

and da new moulding 4 da rear window is round da 500 bucks mark thats da complete seal kit genuine from nissan

im bout 2 re-do mine...!!!!

Please talk properly like your mum raised you to.

Link to comment
https://www.sau.com.au/forums/topic/178304-windscreen/#findComment-3254220
Share on other sites

You can use another type of seal, I think it is an early CommonWhore item. Not to sure on the model, I will try and find out for you, However, the fit and finish will not look as good as a Nissan jobbie, I know, I have just done front and rear screens.....

Mike

P.S

That is a shitty half job, I would tell those rude bastards to pay for the R&R of the screen, seeing as they were so quick to take your coin, but then do a sub standard job.

And If they don't like what I have to say, tell them to come talk to me direct.... I like handing out pain!

Edited by MIKE_R32_GTR
Link to comment
https://www.sau.com.au/forums/topic/178304-windscreen/#findComment-3255927
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 馃挭馃徏 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
  • Create New...