Jump to content
SAU Community

Recommended Posts

Hey all...

Following spare parts for sale which I got with the wagon I picked up, plus some others I have accumulated

Located in Kallangur, Northside Brisbane, and best bet to see them is on weekends.

Preferred contact during Business hours is email timross__AT__serviceessentials.com.au or after hours on mobile 0401606223

Feel free to raise questions in this thread, HOWEVER be aware that it may take a day or two for me to reply, and if anyone gets in before you on the preferred contact methods above, stiff shit thats life

Anyways, most of these are ballpark figures but feel free to make a reasonable offer if my pricing seems unreasonable:

Turbo off RB20 red top, very little side to side shaft play, no front to rear shaft play (inc actuator): $200 (might also have a spare stock dump pipe maybe)

Stock RB20 sidemount intercooler: $50

PRICE DROP - Turbo $170, or $200 with SMIC

Pair stock front Springs: FREE

Charcoal Cannister: FREE

Various Door Glass and wagon rear side glass: $20ea

Window Winder rails: FREE

Pair front struts w/ stock springs and lower control arms: $40

Pair S3 headlights: $150

Pair Electric Mirrors: $60

Pair Manual Mirrors: $30

S3 Front Bumper: $100

Steering Rack: $60

Stock intank Fuel Pump: $30

Washer Bottle: $20

Auto Tailshaft (have 2x): $40ea

Power Steering Pump: $30

Master Cylinder: $20

A/C Compressor: $50

4 Guage Dash Cluster: $30

Windscreen Wiper Motor: $20

A/C Condensor Fan: $30

RB30 AFM (x2): $20 each

RB30 ECU (Manual): $40

Have 2 other RB30 ECU's here, not sure what they are, still have part numbers on them: $30each

Wiper Switch (which includes adjustable intermittent speed): $20

Simota Pod Filter in VGC: $20

Front and rear seats (blue) in VGC (no stains/burns/tears/cuts): $40 the lot

Edited by retox

Dont spose you have any spare tail lights tim?

What difference between drive shafts also. our centre bearing is fuxored and its cheaper the replace it with second hand unit :D

Get back to me whenever bud...no rush!

nah I dont sorry mate.

try www.r31skylineclub.com

umm... I believe the tailshafts are different lengths between the auto and the manual.

I think I have a brand new unused centre bearing here as well... make an offer on it if you like!

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...