Boost Creep - Overboost Problem - Any Ideas...

[SevenAngryPenguins]

Because the flange is thinner the bracket is closer so just put 2-3 thin washers in between the flange and bracket to space it out a bit. Only has to be the difference between the old flange and new,so only a couple of mil.

didn't think of that might give it a go before forking out for a new pipe.

Wont rev past 5000 sounds like an ignition problem check coils for cracks and spark plug gap (0.8mm)

Mine misfired a alot around the 5k with the increased boost but after siliconing the coils into holders and spark plug regap runs really well

Edited July 29, 2007 by SevenAngryPenguins

[SevenAngryPenguins]

problem solved took turbo off and die grinded my wastegate opening now runs about 9psi with stock actuator

Edited November 8, 2007 by SevenAngryPenguins