Jump to content
SAU Community

For Sale Rb26dett(sold) And Two Rb25det Neo Motors

gianavel
 Share

Recommended Posts

gianavel Contributor

gianavel

Posted
Posted (edited)

Hi Guys,

I have an RB26dett motor for sale.

It is out of an R33 GTR with about 70k on it. It comes with turbos and std dump pipes, air filter set up etc.

Also comes with loom, ECU and MAFs.

The motor is out of the car and can be viewed prior to purchase.

$4,500.00

(SOLD)

Also have 2 RB25det NEO motors.

First one is out of a 1998 Stagea, Auto.

has 140k on it and can be test driven in the vehicle.

This motor will be sold with loom and ECU etc.

$3000.00

Second one is out of a 1999 Stagea, Manual.

This motor is already removed, it had about 60k on it

This motor come without ECU and Loom, but with everything else.

$3000.00

(If someone desperately needs the ECU/Loom contact me and I will sort something out. Basically I need to be sure we don't need it before I sell it! So I need to do some more research in to our wiring needs.)

If I can be of any help please contact me

Andrew

post-26461-1185617311_thumb.jpg

post-26461-1185617328_thumb.jpg

Edited by gianavel
fat200sx Enthusiast

fat200sx

Posted
Posted
Hi Guys,

I have an RB26dett motor for sale.

It is out of an R33 GTR with about 70k on it. It comes with turbos and std dump pipes, air filter set up etc.

Also comes with loom, ECU and MAFs.

The motor is out of the car and can be viewed prior to purchase.

$4,500.00

Also have 2 RB25det NEO motors.

First one is out of a 1998 Stagea, Auto.

has 140k on it and can be test driven in the vehicle.

This motor will be sold with loom and ECU etc.

$3000.00

Second one is out of a 1999 Stagea, Manual.

This motor is already removed, it had about 60k on it

This motor come without ECU and Loom, but with everything else.

$3000.00

(If someone desperately needs the ECU/Loom contact me and I will sort something out. Basically I need to be sure we don't need it before I sell it! So I need to do some more research in to our wiring needs.)

If I can be of any help please contact me

Andrew

MMM i was after a cam angle sensor? do you have one?

Cheers,

John

gianavel Contributor

gianavel

Posted
  • Author
Posted
MMM i was after a cam angle sensor? do you have one?

Cheers,

John

Hi John,

Yes we have a cam angle sensor. $3000.00 and I'll throw in a free motor! :laughing-smiley-014:

Sorry mate, not going to start parting out a motor, I want to sell the whole thing.

Nissan should be able to get them for you?

Cheers

Andrew

gianavel Contributor

gianavel

Posted
  • Author
Posted
hey mate interested in the rb26dett, wondering if its still for sale?

also where you are located.

thanks.

Hi,

Yes the motor is still for sale.

We are located near Penrith, NSW.

Let me know if you want to come and have a look.

Andrew

  • 4 months later...
  • 3 weeks later...
gianavel Contributor

gianavel

Posted
  • Author
Posted
still available?

Sorry mate, missed this post.

I haven't been near the forums for a while.

Yep still available, I was just beginning to plot a secondary use for them!

Let me know if you need any information or test running etc.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...