Jump to content
SAU Community

Recommended Posts

Gday, just after a few (experienced) opinions here.

My car has been off the road for several years now, and im getting enthused to finnish it, so im not sure if im just looking for an excuse to spend money on an unnecessary upgrady or not.

Ive got standard ignition with standard coil packs on a built RB26 with an Autronic, hopefully putting out over 300KW at the wheels (The engine isnt assembled yet).

Is there any sense in getting splitfire coil packs or do they provide no advantages over properly working standard ones? Ive never had any ignition problems, but then ive never experienced this power level.

Should i spend $500 on something more worthwhile??

Thanks,

Shaun.

Link to comment
https://www.sau.com.au/forums/topic/178501-splitfire-coil-packs-for-rb26/
Share on other sites

The coilpacks are worth evry penny if you ask me. i use them in combination with a spark amp and they havent failed me yet. i switched to them as i was beginning to experience spark issues that didnt stop after re gapping the plugs. but i run 450 kw on a daily driver. I think they can handle quite more than the stockers. a friend of mine who has a 26 in his R33 GTST using a T3/T4 hybrid ball bearing turbo pushing 450 HP cracked 3 of his stock coils, and if im not mistakin these packs can handle more heat.

yep- the stock ones will die eventually, and you may even see problems at 300rwkW if they are old

splitfires are a good cure, but lots of people use the bosch coils and leads approach these days, which works out a little cheaper, but doesn't look as neat.

Splitfires are only useful is the stock coils are stuffed/dead.

If the stock ones are fine, then there is absolutely no reason to change em.

There are oodles of cars making over 350rwkw using stock ignition without an issue

yeah splitfires are good, but only if your coils are dying

Also, if you don't have lots of money to spend, i'd look at wasted spark

round $140-$160 for a complete setup and sell your old coils to fund it

Parts needed:

VN Coilpack or Buick V6 coilpack from the states round $60-$80

VL or VN commodore lead pack round $80 for 8mm eagles

then wire it up to your old coilpack loom:

Just make sure you label the wires before cutting them

gncoil9vn.jpg

you cut the lead just after the ignitor, only on the 7 pin plug, leave the 3 pin, that is your timing and power plug :D with the black coil loop

in this order Left to right when looking at ignitor:

Ground, 6, 5, 4, 3, 2, 1

Connect wires 1/6 2/5/ 3/4 together and put one of each up to the top posts

You can now cut the timing wire mentioned above and bridge it onto the 1/6 post

When doing this, mark the front of the coils with the coil numbers, i scratched mine on with a screw driver because i was in a rush

Now for the bottom posts:

Take the power wire which is in the middle of the 3 point plug and bridge the power to each post on the bottom row of the coilpacks

Then get your spark plugs, use the longest up front, all the way to the shortest for the firewall cylinder(6 i think? or is it 1)

then mount the coilpack on the firewall, make sure no wires are out, maybe insulate the back of the coil or put heatshrink over the wires first

Then plug it in, take the ground which you haven't touched on the 3 point plug and reground it(has a bolt holder ground thing on it from factory)

Then make sure all coils and leads are in the right holes :P and start it up

Should work perfectly

if you have any missing, double check the wiring and cylinder leads

Gday, just after a few (experienced) opinions here.

My car has been off the road for several years now, and im getting enthused to finnish it, so im not sure if im just looking for an excuse to spend money on an unnecessary upgrady or not.

Ive got standard ignition with standard coil packs on a built RB26 with an Autronic, hopefully putting out over 300KW at the wheels (The engine isnt assembled yet).

Is there any sense in getting splitfire coil packs or do they provide no advantages over properly working standard ones? Ive never had any ignition problems, but then ive never experienced this power level.

Should i spend $500 on something more worthwhile??

Thanks,

Shaun.

I have a set on mine(Splitfire)....only because I had some of the old ones crack.

I have the cover off(To allow ventilation)...ignition module earthed...

Tape up all the loom.....tape up your coils.....only change the set if you start seeing problems..

But if you have money...buy them ASAP....cause your pocket is on fire.

I have a set on mine(Splitfire)....only because I had some of the old ones crack.

I have the cover off(To allow ventilation)...ignition module earthed...

Tape up all the loom.....tape up your coils.....only change the set if you start seeing problems..

But if you have money...buy them ASAP....cause your pocket is on fire.

Ha Ha, my pocket is definately on fire.

Thanks for all your opinions, i think ill spend my money on the engine build instead (oil control maybe), and then replace the coils when they cause a problem.

Im using an Autronic SM4 without CDI

Shaun.

The best proven coil-pack is new genuine nissan, but if your on a budget like most coil-pack buyers splitfire are your next best choice and WAY cheaper. Best set-up is a new std set with an amplifier.

Splitfires are the same as stock, so how is it any better? :action-smiley-069:

I cant say ive heard of splitfires failing any "quicker" than a OEM coil... come to think of it, most splitfires are still working. No dead one comes to mind at this stage but then most people have only been using them for 3 years or so

Splitfires are the same as stock, so how is it any better? :D

I cant say ive heard of splitfires failing any "quicker" than a OEM coil... come to think of it, most splitfires are still working. No dead one comes to mind at this stage but then most people have only been using them for 3 years or so

yeah how many splitfires are going strong after 15years? we sell ALOT of splitfires (100's and 100's) and you would be suprised how many are DOA (dead on arrival) or play up not long after the warranty period stuffs up (dont get me wrong ive had them in 3 cars, current has a FET set... same thing). look at some top level drag cars like the HKS, SAURUS.. PHENIOEX use NEW std coils with amplifiers like twin power etc with no dramas at all....

veilside's R32 GTR, 8 second on radials runs standard nissan coils. so they can't be too bad IF they are working properly. if they fail the only viable option is splitfires as the nissan ones are far too exxy for most to handle.

yeah how many splitfires are going strong after 15years? we sell ALOT of splitfires (100's and 100's) and you would be suprised how many are DOA (dead on arrival) or play up not long after the warranty period stuffs up (dont get me wrong ive had them in 3 cars, current has a FET set... same thing). look at some top level drag cars like the HKS, SAURUS.. PHENIOEX use NEW std coils with amplifiers like twin power etc with no dramas at all....

Ah but now we are talking Japan where prices may indeed vary?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before you blow your car up, have you checked you've made all the correct modifications to the wiring if you're still using the RB20DE loom?   Some things to look at: The pin used for the map sensor on the RB25DET, is the same pin used on the RB20DE for the Ring Gear Crankshaft Position Sensor, no idea what you've got it plugged into now. The turbo pressure control valve solenoid you're talking about on the RB25DET, the same pin is used for the Variable Air Intake Control Valve on the RB20DE.   The factory manual has the wiring pinouts in it for you to check everything. It also has the diagnostics process to read codes out. In addition, there's a great table that shows what sensors and what actuators not functioning will relate to which signals. And Nissan confirm the as everyone else has from experience, the Solenoid being disconnected won't cause a fuel cut. However, the turbo pressure sensor being missing / wrong, WILL cause a fuel cut. https://www.nicoclub.com/service-manual?fsm=Skyline%2FR34-Workshop-Manual-English.pdf
    • I've been hunting info on the G Series II - this is best I have found so far(Link below). Still waiting on the G35-1150 comp map, kind of very keen   So how do we go about getting precision on that little table of yours ?   https://turbosbytm.com/sites/default/files/product/technical-info/Garrett-G-Series-II-Product_Flyer 25 30 35_1.pdf  
    • yeah I get ~0.6L per session into the catch can. very ethanoly. It ends up overflowing out the breather of the catch can on circuit days too even with a 2.3L capacity catch can and I only drain out ~0.6L max. So every session I have to come in and drain the catch can, which is a hassle. So this is me cracking the shits and doing everything I can without removing the motor (back of head sump drain/breather and oil restrictors off the table). plans short term are: full length splash plates remove oem cam cover baffle add foam and reinstall at -10 or -12 AN fittings to the side of the cam covers down to the sump (luckily I already have fittings in the sump) Yes the ~340,000km unopened motor is probably not helping things
    • I'd use any fuel safe foam....mine went in 15 years and 15 rebuilds ago, still getting reused I'd have to say I don't understand swapping to studs to fit a particular baffle unless you are having a massive blowby issue, and even if you are addressing crankcase not head breathing is probably the next step.
    • BTW, the reason I came in here to "update" this list was that the Garrett G Series II range have been released and I've updated the list with their flow details if you're curious to check how they fit with previous Garretts and other brands The G-Series II G35 990 looks like a banger...
×
×
  • Create New...