Has Anyone Changed Cam Angle Sensors On R33s?

[Beer Baron]

yeah for the RB26 32/33 cas = the same (metal cover). 34 cas different (plastic cover and different cam drive).

[abu]

Think some of the late R33's had the pastic covered one as well so that wouldn't work, as long as its the metal cover one then you shouldn't have a problem

[Ultimategtr]

Thanks for the quick reply man.

[robbo_rb180]

bringing back an old thread.

i have the same problem

can any 1 tell me the colour of the wires that have to be swapped?

cheers

rob

[KiwiRS4T]

bringing back an old thread.

i have the same problem

can any 1 tell me the colour of the wires that have to be swapped?

cheers

rob

I would like to know as well. I have the opposite problem. I have bought an R34 Link because it fits in the Stagea plug but the engine is a S2 Rb25DET. If the drive for the R34 CAS is different then I won't be able to use one but it sounds as though the stock Stagea (R33) one should work if rewired.

[robbo_rb180]

"and you need to swap the two triger wires around in the plug.. ie green/yellow green/red i think. the black ones earth the black/white is power"

found this after a heap of searching.

Edited July 31, 2010 by robbo_rb180