Jaycar Iebc Problem

[Robo's]

Rigged the Jaycar IEBC up as per instructions, intercooler pipe going to top of solenoid, then hose from bottom of solenoid goes to a t/piece, one to atmo with a 1.5mm restrictor and the other to the actuator.

Problem is, with IEBC set to 100% or 0% it makes no changes to boost what so ever. Occasionally on the handcontroller it reads a funny reading like a loose conection on the display screen. Load readings read fine when driving upto 64. High or low settings also have no change.

I just tested with ignition on and at 0% i cannot blow thru the solenoid. I increase percentage settings and you can hear the solenoid open and i can blow thru it. Hmm, all should work until i go for a drive. Driving along at 60% i should see huge boost but no, just my normal boost curve (around 16psi, im looking for low 20's as like my manual boost controller). So i lower the settings but still no change until i reach 0% and still have 16psi. Hmm weird as when i come home i cannot blow thru the solenoid so why only 16psi. Maybe something is wrong with the IEBC as it climbs past load 1, maybe it doesnt shut the solenoid???

Edited July 30, 2007 by Robo's

[Robo's]

Anyone?