Jump to content
SAU Community

R34 Tiptronic Gear Box

lukew105
 Share

Recommended Posts

Dj laBBy Collaborator

Dj laBBy

Posted
Posted
Hey guys..

just wondering what i would need to do to fit a 34 tiptronic gear box into my 32.. or if it is even worth it

any comments that will actually help me will be much appreciated

cheers

Well obviously you can bolt it straight up, but you will need to use the auto computer which am sure it plugs into the rb25 computer, so either getting it to talk to rb20 comp or if it can be a standalone, dunno.

Then being triptronic, the 34 shifter will be needed, so you will have hassels getting the shifter in the centre console, then hopefully it has the same mounts. Then maybe the gearbox length may be different, if that is the case, the tailshaft may need to be modded.

I really don't know, but just off the top of my head, they might be the issues....

Have fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      UniClutch

      By Butters · Posted

      Uniclutch install vid, RB Track edition.   Highlight reel is very drive able, not noisy but still heavy with the clutch master he has.      
    • GTSBoy
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By GTSBoy · Posted

      Replace your battery.
    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      And....if that could be true for all R34 GTTs, then it might be good. But in reality it is not really any better than my standard instruction to "go out and have a look at it yourself, and wave a tape measure around" etc etc, because as soon as you have any adjustable arms, or coilovers with smaller diameter springs, or tyres that have any bulge that goes out further than the rim, etc etc, then the simple version of the information is still potentially misleading. Plus, nothing in this is static. Everything is moving. At the rear the wheels swing inward at the top as they go up, so the clearances on the inside change as the suspension is compressed. At the front it's even worse. And then you have the difference in absolute wheel position in the arch can move around more, or less, depending on how compliant the bushes are. If, like me, you have sphericals on the front caster rods (and on the FUCAs also, but these are probably less dominant when it comes to wheel position), then your wheel will swing forward/backward under loads, as well as up/down, as well as steering angle. You end up having the simple numbers with 17 caveats/footnotes for each.
    • Therry
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Therry · Posted

      Both windows operate normally while the engine is running but start to sag as soon as I switch off.  Does anyone know of reasonably priced replacements or other brands that will fit?
    • Duncan
      R32gtr sputtering and stalling

      By Duncan · Posted

      Actually PowerFC is probably the easiest to get basic data from, it comes with a hand controller and display so you don't need to remember to pack a laptop every time you drive. It also has a PC based viewing/logging option if required. Nissan used consult on these because back in the mid 80s, ODB was just a glint in a standard's body's eyes.  They switched to OBD shape around 2000 (my 2001 Cima had OBD shaped but not OBD compliant port) With the standard ECU there is a cable and software available to give basic data too, I think it is called Nissan Data Scan or s
×
×
  • Create New...