Jump to content
SAU Community

Recommended Posts

Hi V35 people,

Great to see an australian v35 forum.

I was planning to pick up a v35 tomorrow and had an inspection report done by state roads. They rekon that the passenger window is not working properly as it goes back down a bit after hitting the top. The owner rekons this is normal.

:)

Is this normal ppl?

Link to comment
https://www.sau.com.au/forums/topic/178958-passenger-window-not-closing/
Share on other sites

Yes this is normal, its a safety/security feature on a lot of new jap and most european luxury cars which ensures that the window is sealed.. State roads don't know what they are talking about. Congrats on the purchase :)

Hi V35 people,

Great to see an australian v35 forum.

I was planning to pick up a v35 tomorrow and had an inspection report done by state roads. They rekon that the passenger window is not working properly as it goes back down a bit after hitting the top. The owner rekons this is normal.

:(

Is this normal ppl?

hi you mean all 3 passenger window?

and are you located in sydney? would that be a white V35? haha the reason i ask was i went to see a white V35 the other day and owner says someone gonna come around and do an inspection the next day.

cheers.

Will.

Yes this is normal, its a safety/security feature on a lot of new jap and most european luxury cars which ensures that the window is sealed.. State roads don't know what they are talking about. Congrats on the purchase :huh:

Both passenger and driver's windows should drop a little when opened and raise up to seal below the turret moulding when closed; otherwise the glass hits the moulding when you close the door. As I have mentioned i have been having trouble with my driver's door power window and when it was stuck up it was difficult to close the door because the glass hit.

Got it fixed today (hopefully!!) and they think it was the module (or relay I think) driving the motor.

Also found out about the fuel door because I checked a few cars while there; as mentioned before when the car is locked so is the fuel door; when the car is unlocked the fuel door is pressed to open. Some of the cars I checked, the fuel door sprung open when I held the open button on the key - weird!

Both passenger and driver's windows should drop a little when opened and raise up to seal below the turret moulding when closed; otherwise the glass hits the moulding when you close the door. As I have mentioned i have been having trouble with my driver's door power window and when it was stuck up it was difficult to close the door because the glass hit.

Got it fixed today (hopefully!!) and they think it was the module (or relay I think) driving the motor.

Also found out about the fuel door because I checked a few cars while there; as mentioned before when the car is locked so is the fuel door; when the car is unlocked the fuel door is pressed to open. Some of the cars I checked, the fuel door sprung open when I held the open button on the key - weird!

johnr,

where did you get it fixed at and at wat price. cheers.

johnr,

where did you get it fixed at and at wat price. cheers.

It was done under warranty so I don't know what it cost; done by E&M Unique Motors, 21 Parramatta Rd, Fivedock Phone 02 9799 9333. See the owner Michael who is honest, helpful and courteous

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...