Jump to content
SAU Community

Recommended Posts

ok, when my car starts in the morning, it runs on all six cyclinder and she goes sweet but as I drive it around and warm it up and it begins to misfire and runs on 5 cyc. It sounds horrible like a combi van. It does this everytime in the morning, and its a on and off thing. Now i've changed the spark plugs, and fiddle around with the coilpact. I suspect one of the coilpack has gone kaput. Any opinions on this problem would be apprieciated. I've performed a diagnostic test and the ecu said there's nothing malfunctiong (trust the ecu:mad:)

Link to comment
https://www.sau.com.au/forums/topic/17906-rb20det-misfiring-problem/
Share on other sites

A quick test:

once the engine is warm and misfiring, whip out the ignition module and stick it in the freezer for a few minutes. Then re-connect it. If the engine doesn't misfire, then its probable the module is faulty. (they only get the fault when hot)

It could be a number of things...I went through a long and painful test process with my 32's misfire. I ended up taking it to a mechanic who had the software to Datastream the ECU, and then they could tell me exactly what was wrong. Try contacting Nissan Service - word of mouth tells me that only Nissan, and very few workshops have this software, but for the pain you'll save - it's worth it. It only cost me about $100 to datastream my 32.

Michael

Guest ameddick

I rekon the ignition module is the problem. I had the exact same issue. Fixed it only last week. Works fine now. Best way to test is if you can grab one of your friend’s modules.

Where is it? It is on top of the motor, right at the back near (the windscreen end). It is black or silver (depending on the way it is mounted). It has two plugs on it and 4 screws. Take them off and it comes straight out. Easy!!! Makes a good paperweight!!!

BTW can anyone tell me the proper way to mount the ignition module? Is it black side up or silver side up? We have 4 32s in our group each mounted differently.

Originally posted by tN^

Ok guys, I just came back from doing the freeze test. The result is no difference: it still misfiring. This is when its already misfiring when I drove it around. Could be coilpack you would say?

Yes it´s the only thing you have left if you havent blown your headgasket between two cyl's. or an extremly bad ign. plug.

Wiktor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
×
×
  • Create New...