Instructions On Bleeding/servicing Bnr32 4wd System ?

[felixy69]

--------------------------------------------------------------------------------

i removed the oil tank in the trunk for painting the trunk

was wondering if anyone know how to put it together/bleed and make 4wd work again?

any english instructions on doing so ?

also i removed abs unit in the engine bay will it effect the 4wd system

thanks

Edited August 3, 2007 by felixy69

[Duncan]

Bleeding: refill the resoviour. Put the car up on stands, out of gear and start the car.

Above the diff there is a bleed nipple next to the put on the attess line. Open the nipple and it will bleed itself pretty quickly - let it run until no bubbles. Keep an eye on level in the boot. Once the one above the diff is done there is another bleeder on the rear of the transfer case next to the attessa line. Once they are both done the system will be bled properly.

Re the ABS, that could be a big problem - I have only seen people with problems after they remove ABS and no solutions. The Attessa ECU takes inputs from the ABS wheel speed sensors to detect wheel spin.

[felixy69]

Re the ABS, that could be a big problem - I have only seen people with problems after they remove ABS and no solutions. The Attessa ECU takes inputs from the ABS wheel speed sensors to detect wheel spin.

thx

but how to i get the 4wd working without abs?

i've seen many gtr without abs tho

[fraz gts4]

You have to have all the abs sensors hooked up.

You can just unplug the abs unit in the corner of the engine bay and re-plumb the lines so they dont go to it.

Im having the same problem, its nearly sorted, you just keep the stock sensors and your away