Jump to content
SAU Community

Fitting New Trust Style Bodykit - Fb Doesnt Fit

michadoo

By michadoo,
in Exterior & Interior Styling

 Share

Recommended Posts

michadoo Collaborator

michadoo

Posted
Posted

Need some advice

Just recently purchased a new trust style body kit.

Done a trial fit today before I send it off to get sprayed and the front bar doesnt fit with the standard reinforcement bar.

Is there usually a modified reo bar to get with new front bars or is it best to modify the stock one?

Has anyone modified their reo bar? Whats the best way to do it? Many complications?

I am lead to beleive the bar needs to be modified also when installing a new fmic??

Can someone please advise me the best way to go about this?

Thanks!

cheez Mentor

cheez

Posted
Posted

its hard to say without seeing the bar. can u take a pick of the inside of the bar and ill help you out how i can. my reo i cut to fit my trial front bar.

but yeh post a pic of your bar and ill see what i can do.

adam-__- Grand Master

adam-__-

Posted
Posted

When fitting a cooler or a new front bar, it's quite common for people to cut the reo bar.

Only down side to this is that if the insurance company find out, they could turn down your claim.

michadoo Collaborator

michadoo

Posted
  • Author
Posted

i will take photo of fb and reo in morning for you thanks for help

probably shouldnt assumed, but did. thought the bar would have come prepared to spray n fit to car but have to drill holes for bolts n stuff which isnt an issue but just fitting it round the reo bar.

my old man is a panel beater which helps... but hasnt been in the game for 6+ years...his concerns are not only the actual support but also the legality of cutting so much of the bar away...more for defect reasons.

I been told to b careful with how u modify reo bar for defect reasons, so just wanna know how other people have done it.

if anyone has actually fitted a trust/trust style bar that can post pics or instructions of reo bar would be great.

I will post pics of bar... and bar on car /c reo bar in morning...thnx for help guys! heaps appreciate it!

:)

DriftyR33 Enthusiast

DriftyR33

Posted
Posted (edited)

I would think you will have to chop the bottom section off, just like in this pic, but like the guys said you could have insurance problems as a front end smash would total your car, I've never seen any that had to cut reo bars for the front mounts on cars, even larges ones, but it all depends on the front mount you got.

untitledzq0.jpg

Edited by DriftyR33
DriftyR33 Enthusiast

DriftyR33

Posted
Posted (edited)
Hmm very interested in this. As i am considering a trust front bar. I take it everyone with this bar has had to modify the reo bar?

I've fitted Trust gracer, Topsecret, Jun, and Trial front bumpers to R33 gtst's, and they all needed the reo bar cut like this.

Edited by DriftyR33
R33silverS2 Mentor

R33silverS2

Posted
Posted
I've fitted Trust gracer, Topsecret, Jun, and Trial front bumpers to R33 gtst's, and they all needed the reo bar cut like this.

So in doing so it would become a lot weaker structually? Hence totally illegal?

adam-__- Grand Master

adam-__-

Posted
Posted

Yeah it would mate.

You can always rebuild it to fit and up to par with the stock bar (strength wise) and get it engineered can't you? I remember hearing someone say something about this, but not sure.

PSI Parts Veteran

PSI Parts

Posted
Posted

The series 1 reo is slightly better than the series 2, as the series 2 is a little fatter and higher (see pic). They are a simple swap around and sometimes you are able to get away with not cutting the reo.

post-28667-1186294484_thumb.jpg

michadoo Collaborator

michadoo

Posted
  • Author
Posted

I have a S1 and still need to modify the reo.

Have a pretty good idea of how to do it now but any input is good input.

will post up pix of the modifications done to the bar and as doing it to help the others that are going to be doing it.

Here are a few pix of the trust bar, and the reo bar, also there is a pic of the bar being held up to the reo bar so show where the issues are and where it needs to be modified.

post-18458-1186305607_thumb.jpg

post-18458-1186305811_thumb.jpg

post-18458-1186305859_thumb.jpg

post-18458-1186305884_thumb.jpg

post-18458-1186305897_thumb.jpg

R33silverS2 Mentor

R33silverS2

Posted
Posted

Hey just a thought, i noticed you dont have an fmic, wouldn't any r33 with an fmic have to have a modfied reo bar anyways. In which case the bar would fit for people with fmic? I know this isn't really helping you out but just for others / myself thinking about a trust bar.

michadoo Collaborator

michadoo

Posted
  • Author
Posted
Hey just a thought, i noticed you dont have an fmic, wouldn't any r33 with an fmic have to have a modfied reo bar anyways. In which case the bar would fit for people with fmic? I know this isn't really helping you out but just for others / myself thinking about a trust bar.

yes i think so... well by looking at it and from what other people have said you will have to modify the reo to fit any fmic

Im going to be putting in a fmic within the next few weeks, that was one of the main reasons why i chose the trust fb as it has the nice gap in the middle for the fmic...either way i dont think there is any way around not chopping up the reo bar.

I will take some pics for ya next weekend when we do the modifying of it and post up a small tutorial for ya to make things easier for when you do it :thumbsup:

but then again... as was pointed out by "psi parts" the s2 has a slightly different reo so may not help that much but may give you a general idea

michadoo Collaborator

michadoo

Posted
  • Author
Posted
i have this bar and a front mount intercooler and yes mine has been cut for the shape of the front bar...

how did you cut the reo?

did you cut the bottom off? and abit of the top? I thought if i cut the top part of the reo, just enough if would fit in the small gap of the top section of the fb...

do you have any pics of the modified reo by any chance? :thumbsup:

4drftn Experienced

4drftn

Posted
Posted
how did you cat the reo?

did you cut the bottom off? and abit of the top? I thought if i cut the top part of the reo, just enough if would fit in the small gap of the top section of the fb...

do you have any pics of the modified reo by any chance? :thumbsup:

yeah i will have a look, post a pic in a min...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...