Jump to content
SAU Community

Want To Shine Up The Rim On My Wheels

gun32gtr

By gun32gtr,
in Exterior & Interior Styling

 Share

Recommended Posts

gun32gtr Grand Master

gun32gtr

Posted
Posted

hey all,

i have a set of rims that have alloy dish that is in some series need of polishing!prob,em is that the clear coat is flaking off and is all pitted so no matter how hard ya polish with autosol etc etc it dont look any better.

so without sending away to be fixed is there and tips that someone knows that will help me out?

cheers kane

p.s searched and nothing

Link to comment
Share on other sites
DriftyR33 Enthusiast

DriftyR33

Posted
Posted

I looked into this after buying a second hand set of SSR 3 piece rims, I found out I had two choices..

1) get them diamond cut and lacquered by a pro.

2) take off what was left of the lacquer, flat them down with wet and dry paper, then polish up with autosol.

I went for option 2 in the end but months later really wished I had got them diamond cut and lacquered, the brake dust gets right into the join to the centre piece, there now all pitted and are a real pain to clean, not to mention polish back up, get them done buy a pro then it makes cleaning them easy and they will stay polished. :down:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • defari
      Spotted - QLD Skyline Owners

      By defari · Posted

      EMJ33 or EJM33 - west end
    • TurboTapin
      GReddy Injector Help!

      By TurboTapin · Posted

      I have a radium fuel rail on my Greddy manifold and used the supplied radium fuel injector to manifold adapters (The round green things pictured). I did always wonder if you could just go ahead and use the second lower hole like you're doing... Wouldn't thicker o-rings solve your issue?    
    • MBS206
      Does anybody use the Firestryker or Element sticks?

      By MBS206 · Posted

      From what I've seen and experienced first hand with those powder extinguishers, they're good to use to break a window and escape the car, and half the time then do f**k all to stop a fire. You just need much more than 1KG worth of powder. Not to mention, half the time it's an engine bay fire, and you can't easily, and do not want to completely open the bonnet, so you're left pretending to be an American Infantry... Spray and Pray baby!   And then 100% that shit is really destructive afterwards!   Realistically, those little ones at a race track might help you keep the fire from growing and give the fire marshal / truck a chance to actually get to you with their multiple large bottles.   For a road car, these days, prepare to deboard as quickly as humanly possible, and move to safety. Allow insurance to fix replace it (unless it's like a rare classic etc, then do nearly everything possible to save it!) Keep the little extinguisher with you to help protect other things around you from burning while you stand there singing "How can we sleep while our beds are burning?"   Secondly, powder extinguishers I freaking hate for indoor use, (this isn't really relevant to a car) as you will get a powder fog around you, and it can be disorientating.   When I did fire training when at BlueScope Steel, they have (had?) their own fire brigade on site. We did all the training, and at the end we were told, "If it's an indoor fire, and you need to use a powder extinguisher, we as the fire brigade would rather you just exit the building, you're more likely to get lost in the smoke and powder fog than do much help, so just GTFO" And pretty much that was what they said for most other fires too, grab extinguisher, if it's much more than paper in a bin fire, use extinguisher to get you and others out of the building to safety...   Part of me wishes when my Skyline caught alight many moons ago, I let insurance sort it out, instead of putting the fire out... part of me now says "But I've saved a classic before it was a classic!"
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to run the 4g aerials to the booster, I had to get access to the rear bulkhead....bit of a mission. Hot tip, don't offer to help change the rear shocks for a mate with a v37.... Remove seat base, 2 clips that slide forward to release it the it lifts straight out Fold down rear seat (pull in from boot) The side bolster of the rear seat is not connected to the middle parts that fold. To remove unbolt at the bottom bolt then push it up off the top hook Then there is a plastic surround behind the seat back, 2 pop out clips, 2 bastard clips, some swearing at it is out Pop the rear seat latch surround off Remove door surround lower trim then side trim  Remove c pillar trim - 4 clips, pull inwards not forwards Remove metal brace - 5 bolts 1 nut Then you have got to the rear strut top...what a pain!
×
×
  • Create New...