Jump to content
SAU Community

Recommended Posts

Hello all,

I just got a Monza sports performance pod filter put in my 25GT, i was wondering if it is really necessary to get like a heat shield and all... if i don't, can it really affect my engine? :)

At low-end torque it actually seems/feels/sounds smoother and quieter, and at high-end i get a mad sucking noise lol!

I want to know.. has anyone tried this brand of pod or knows someone that did and their experiences etc.?

Also, does anyone here run a pod without a CAI or heatshield?

ooo and one more question lol, is it ILLEGAL in NSW to have a pod without a heatshield of some sort? or will i get defected? if i do get defected... will i have to pay a fine? if so.. how much?

lol i ask way too many questions, but i'm new to the game so please forgive :)

Thanks all!

P.S. i fully realise i shouldve asked these q's BEFORE getting it in, but MEH, i jus couldn wait :)

Link to comment
https://www.sau.com.au/forums/topic/179400-a-few-things-i-need-to-know/
Share on other sites

hey thanks for the pic missr34 and luke , what do you mean "the lines" ? <I'm not so attuned with the mechanics of cars>

and Missr34 where did u get ur heatshield from and for how much?!

thanks!

is the ones the go from something at the top of the engine to the side of the airbox. what did you guys do with them? just unplugged or put them somewhere.

i circled the bit where they join into on the airbox.

cheers luke

post-38653-1186230173_thumb.jpg

i did dyno runs back to back between, pod vs. pod/heatshield vs. airbox

if you're going to have a pod filter on street car then have a heatshield with a cold air intake - this is especially vital. sitting in traffic and under 60kmph where there's hardly air flow into the engine bay will mean you're just sucking up hot air (which takes up more space than cold air).

i have gone back to the standard airbox... minimal, if any difference between a CAI + pod + heatshield, and the cost factor too.

the money you spend on setting up the pod can be spent on buying a nismo, pipercross, k&n panel filter for cheaper... and you're still ahead

the lines were just tucked away, got it put in through Car Toys so they know what they are doing, cant remember what the heatshield cost thing it was 100 or something???

ive got a proper cold air intake system with it all though

I put in a K&N filter, then trialed a pod. To tell you the truth, i preferred the K7N filter. You can't feel the difference really between the two.

LMFAO at Eug. I sat there trying to get that bug off my screen, but its in ur sig baha.

Well if theres no difference in performance I don't really mind, because now i have a hectic sucking noise when revved high, but I was afraid it may damage my engine in some way due to the fact that it may suck up hot air from the engine :S

ooo and one more question lol, is it ILLEGAL in NSW to have a pod without a heatshield of some sort? or will i get defected? if i do get defected... will i have to pay a fine? if so.. how much?

to answer your question simply,yes it is illegal

my mat refused to get a cas,got done with 2 point,$140 fine

it has to be fully inclosed cas,and theorectically they can still defect you for that cool new sound you have,as it's louder then your

standard airbox

and again if you dont hava a engineers certificate to say that it is all safe(environmentaly)saving the planet an all

Edited by SMOKE'M
Well if theres no difference in performance I don't really mind, because now i have a hectic sucking noise when revved high, but I was afraid it may damage my engine in some way due to the fact that it may suck up hot air from the engine :S

the difference in ambient air temperature with the stock setup and your pod is fine and wont damage you engine at all. Abosulte worst case (and this is if you drive around with 91ron unleaded, in which case you should be shot lol) on a 40 odd degree day your ecu might retard some timing from your engine to reduce knocking(ping), which it does to protect your motor anyways.

All is safe :P

if your going to do it.. CAI..

In my engine,I got a 33 intake.. and the snorkle that take air in from next to the bonnet opening does not mate up to the grooves in under the bonnet..

so atm im just sucking in hot air from next to the exhaust..

hmmm.. should get around to fixing that..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jamie does know his stuff , you might just want to give them a call and ask - here is their FB page  -  https://www.facebook.com/profile.php/?id=100063506985512 - you will find the number to call them on.
    • Do you think the guys in Penrith are install the E85 Kit?
    • Thanks Pac!   I will reach out to them!
    • Yes, but 2 things of the top of my head, 1. Legalities of nitrous on a street car. 2. No chop chop. I fully understand that there's much cheaper ways to make power, and whilst a wet 50 shot is fairly cheap to install, bottle fills are expensive, and bottles always need to be refilled, and nitrous also has its own inherent issues with reliability, and tuning, from my experience of others using nitrous, it doesn't take alot to lunch a engine real quick if something goes slightly wrong when spraying, if I wanted a big chunk of additional powers, a spooly boy would make alot more sense, disregarding the additional engineering, supporting mods and other logistical issues of sticking a spooly boy on a car that came naturally aspirated from factory  In the end I'm not racing for sheep stations, and I don't really care if people make more power, or are faster than me, or spend less, or more than me, the only thing the car needs to do is drive around and make me smile, which it is doing now Really, I just want a shiny new intake to look at when I'm cleaning the engine bay, and of course, some more induction doorts, and maybe even that 5kw for that elusive 200hp cherry on top that I might get If the FAB9 intake plenum, TB and air filter box thing doesn't eventuate for whatever reason, Plasmaman do one, not as fancy looking, and a fair chunk of more cash is required when including the TB and other bits and pieces that are required to install it, but, it is another option that is available to me if FAB9 one does fall down (but I really, really.....really, want the FAB9 one though) TL;DR. You want what you want
×
×
  • Create New...