Jump to content
SAU Community

Recommended Posts

It doesn't usually work very well. There are 2 options I forget, my mechanic set them both to 10%. It improved slightly, but not all that much. Changing your decelaration habits is the best way to stop it happening.

Edit: I think the setting is "Dec. Air" and has Lo and Hi settings or something.

Originally posted by Grim

Thanks but the safc is capable of correcting the problem...

As I already said, no it's not. You may see some improvement as I did, but also as with me and most other people it won't cure it. Set both settings to10% and see how you go.

Guest INASNT

grim u rice boy did u get a atmo venting bov??

remember we tried to set the dec air function with my blitz atmo and the s-afc?? if u dont remember, well it didnt work, it seemed like it worked but when u do a cold start the engine wont idle properly, its goes all crazy. In the end i had to turn the dec air thing off!!

Guest INASNT
Originally posted by Grim

I thought that was cos your BOV was mounted and sealed badly and was leaking air. plus i don't think we tried very hard to tune the dec-air feature....

nope i had my stock bov blocked and the blitz recoed with new springs.

The best thing i did was pissing the blitz bov off and going back to the stock bov!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
    • Temu raptor, lol. At least the owner isn't your typical ranger danger lot
×
×
  • Create New...