New Setup Not Making Enough Power

[CEF11E]

yes but you would need to do it on a dyno to get the correct result. you will find by placing the boost nipple after the turbo elbow you will get a more linear control.

this is quite often the case with small housing hiflows. not really a problem just needs a bit of tuning.

[TTT]

the gain funciton on the controller is to adjust how fast boost comes on..

i don't think that it will hold it up top

[mad082]

also if you are reading boost from before the intercooler and the dyno if from after the cooler then you will get a difference there, since the cooler will add some restriction.

[Toasty]

its a 32 high flow. is there something on the boost controller i can use to get it to hold full boost?

[GTAAAH]

Oh your not too far off then, i would expect around 195 max

[CEF11E]

Toasty, don't touch the controller without having it on the dyno. a small percentage of gain can be a big boost increase with RB20 hiflows. gimmie a call and i will help u sort it out.