Jump to content
SAU Community

Recommended Posts

for the pass 2 months this icon has been appearing on my climate control. It appears when I turn on my climate control and blinks when i increase the fan speed (for the heater or aircon)

anyone know what it is because it driving me nuts

thank you in advance

ps it is the icon the arrow is pointing to

post-32541-1186382605_thumb.jpg

Air Purifier?

i have no idea.

i would also want to know what it is.

On my 33 there is an air purifier on the parcel shelf, has a grenn and red led on the front and a remote for it, it is genuine nissan as it has nissan on it.

The A/P obviously suggests it's for an air purifier.

They were an option from the factory for skylines, the japanese love their ciggies >_<

as worped said, try looking on you parcel shelf

now all i need to know/find is the bloody location.

i have check the parcel shelf. seems like there nothing there.

any other place for me to check?

no idea where this "air purifier" located.

nice little feature until it decide to play on me. assuming that something is wrong with it

Maybe try under the parcel shelf, if it was on the parcel you would know its there, in my 33 its about 12" long 8" deep and 3" high, its very noticable.

Hi W0rp3D, don't suppose you know where we could get replacement filters for the Puretron? The filter in mine is well overdue.

No idea, hav'nt had my 33 long and hav'nt had any issue's with the puretron yet, if i do i will probably just pull the fuse anyway.

Maybe try nissan, they might stock them, or be able to get them in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...