Jump to content
SAU Community

Recommended Posts

Hey guys, I am serious about this too, I need a good cheap conversion (easy too) for my old dato ute. Nissan 720 the poor little thing

is a bit tired only having 119, 119, 115, 110 psi and using massive massive amounts of fuel. Should be 171psi.

What I need is some Ideas of engine swap and how hard / easy it will be. Any help would be great.

I am looking for good towing capacity and fuel economy.

Currently its a L18

Current thinking is a

Z24 2.4L out of a navara. I Know for a fact it bolts straight in.

SR20DE

vg30DE

vg25DE

ca18T

L20

v6 common bore (dont really want to go that way)

Link to comment
https://www.sau.com.au/forums/topic/179621-conversion/
Share on other sites

If you are going the 2.4 then make sure it is the efi version as the carby ones are woeful on power and fuel. With it being full chassis you can pretty much put anything in legally.

So work out what it is going to be used for and use the appropriate engine.

EG Small cube not good for towing but good on fuel bigger cube good on towing but worse on fuel. You can buy a kit to fit the holden V6 into most utes and they are cheap as no one wants them for anything but a work ute.

The 2.4 Navara engine should also fit quite easy and as long as its injected as in the KA24 and not the Z24 then it should be quite torquey aswell.

Link to comment
https://www.sau.com.au/forums/topic/179621-conversion/#findComment-3272545
Share on other sites

might be worth calling Castlemaine Rod Shop, they make a amazing number of conversion kits. you could also try and find something like an owners club or even talk to a Nissan commercial wrecker, sometimes they can be a mine of info on what goes with what because they see so many parts. if you dig enough you'll find someone, somewhere that has done it before.

alternatively, once you've calculated the time and money, and then doubled it, consider buying another ute unless this is something you really want to do.

google is you friend. $1400 for the V6 kit:

http://www.v6conversions.com.au/nissan720.htm

Edited by Scooby
Link to comment
https://www.sau.com.au/forums/topic/179621-conversion/#findComment-3272752
Share on other sites

Mate if you want easy get the L20. Dime a dozen too.

Im putting an L18 into my datsun and it literallly just drops in and plugs up.

The only thing youll notice is the L20 wont rev as high but i spose thats not really an issue in a ute.

Link to comment
https://www.sau.com.au/forums/topic/179621-conversion/#findComment-3272778
Share on other sites

ok cool thanks guys..... mmm more thinking I can get the v6 common for around 500 including the kit and fuel pump too. If he has not sold it already.

Would love to stevie but I dont want to spend the money I am a tight arss....

Edited by race_snooze
Link to comment
https://www.sau.com.au/forums/topic/179621-conversion/#findComment-3273082
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which manifold mate? Meanwhile......Mark is wondering how bonnet vents would look on the NC 🤣
    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
×
×
  • Create New...