Jump to content
SAU Community

Recommended Posts

hey,

well i was going to buy some whiteline sway bars but the thread started on here wont get back to me so im going into autobahn tomoro to buy some. I was just wondering what size is best for drift... ive been told thick front good and slightly skiny rear and good traction.... but if i want to set up car for drift is fat rear good??

ANyone recommend some thicknesses for r32 gtst 4 door for front and rear whiteline sway bars.

thanks

Link to comment
https://www.sau.com.au/forums/topic/179657-sway-bars/
Share on other sites

actualy autobahn are $20 more expensive each than SK but i need these urgently.. Im going in today to sort things out with them. I know a few guys who work there so i get it fairy cheap. I dont know about saving $60?? I know commodores are cheaper to buy for than skylines so maybe u have a diff make of car... i dont know... maybe you got lucky.... but me mate told me he cant do them for $189 cause thats prettymuch what they pay after they have it delivered to thre store.

Anyways... i think i might get the fattest ones i can.. thanks guys

Link to comment
https://www.sau.com.au/forums/topic/179657-sway-bars/#findComment-3272734
Share on other sites

If the autobarn guys can't guarantee that the bars will have minimum 3 hole adjustment (they usually have 2 hole these days) then get 24mm front, 24mm rear. It will be the only way you can balance the car.

If they are only 2 hole then you will need to set the front on hard and the rear on soft and that should be fairly balanced. If you want the thing more taily then put them both on hard.

If you go bigger on the front without the 3 hole (minimum) adjustment either end then you will not be able to dial out the understeer.

Link to comment
https://www.sau.com.au/forums/topic/179657-sway-bars/#findComment-3273676
Share on other sites

Swaybars are the single best enhancement you can do for the handling of your car. They essentially link the sides of your suspension and minimize the body roll, which means your car handle much better through corners.

Make sure you buy adjustable swap bars. Adjustable bars allow you to tune in or out understeer/oversteer as required. The incremental cost of adjustable bars over non-adjustable is minimal for what you get in return.

Link to comment
https://www.sau.com.au/forums/topic/179657-sway-bars/#findComment-3280935
Share on other sites

For skylines, 24mm front and 22mm rear seem to work best with normalish spring rates for street use.. Swaybars work well because they simply have the least downsides for controlling roll compared to the other methods like springs (lose compliance) and low speed bump (lose midcorner grip).

Edited by salad
Link to comment
https://www.sau.com.au/forums/topic/179657-sway-bars/#findComment-3281488
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Its hard to tell really. The Q50 owner's forum talks about it a lot and has quite a few people directly affected, but no idea what % of cars sold actually had the block replaced. Also, there seem to be 2 distinct issues which both get diagnosed by Infiniti as requiring a block replacement (no wonder they are going broke) 1. "Porous block" where coolant mixes with oil through thin or poorly cast parts of the block 2. Head coolant gallery plugs not sealing. If I was noticing engine coolant loss I'd start with cooling system pressure test (as always) and then I'd pull the cam covers and reseal the coolant gallery plugs on both side before worrying about a potentially porous block.  If neither of those did the trick it would be put in a second hand engine out of japan; I haven't checked pricing but I'm sure there are plenty around by now as they've been in production 10+ years
    • To clarify what I posted above, I though you both had a situation where it cancelled sooner one way than the other.....if it is reasonably even where it cancels in either direction that is probably normal (consider gentle movements like lane changes, you don't want it to need half a turn of lock to turn the indicators off)
    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
×
×
  • Create New...