Jump to content
SAU Community

New Fuel Pump


COATZI
 Share

Recommended Posts

Hi,

My fuel pump on my 96 R33 Sh!t itself, what would be some good options for an easy change over, just get a new stock one back in. Or can I put a GTR or something after market in without to much mucking around.

What kind of benefits would i have putting in something after market?

Cheers,

Link to comment
Share on other sites

No point going back to standard, upgrade while you can.

I just upgraded from a standard pump to a GTR pump, works minttt.

Go a GTR if you don't want to spend big, it will support whatever you want to do most likely.. or if you really want to go to a new pump go a WALBRO or a BOSCH 040.

Good value for money, and will support big power.

Thanks,

Abu

Link to comment
Share on other sites

Would an R34 GTR pump fit on my R33 GTS-T?

Cause I seen one for sale on here,

Also changing to a GTR or Aftermarket pump is it a straight swap or do I have to tweak computer or anything in management?

Cheers,

Link to comment
Share on other sites

I put a bosch 040 in my 33...worked a treat so far. And preety much silent! (it will be loud if you dont install it properly) You dont have to tweak anything managment wise :) But you will have to slightly mod your bracket and cut a bit off the fuel line that connects to the pump but thats easy to do. There are step by step tutes on this website to guide you through it easy!

A new pump is a better idea than a used 10 year old GTR pump. Worth the extra cash IMO

Link to comment
Share on other sites

+1 for new pump, dont want it to fail on you again

i put a gtr one in and it was very loud (party because of the bodgy workshop that installed it wrong)

changed it for a walbro 500hp kit and it was much quieter and pretty much a straight swap, all hoses + clamps come with the kit i think the only thuing i had to change was the connectors for the positive and negative.

the 040 bosch is probably equivalent to the walbro one, either way they should both do for approx 250rwkw

Link to comment
Share on other sites

  • 2 weeks later...
+1 for new pump, dont want it to fail on you again

i put a gtr one in and it was very loud (party because of the bodgy workshop that installed it wrong)

changed it for a walbro 500hp kit and it was much quieter and pretty much a straight swap, all hoses + clamps come with the kit i think the only thuing i had to change was the connectors for the positive and negative.

the 040 bosch is probably equivalent to the walbro one, either way they should both do for approx 250rwkw

I just now changed my stock pump to a Walbro..550 hp ..255 lph

Cost me 180 at Autobarn there on special till fathers day.. ;)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
    • Hello, I am looking to replace my two rear drive shafts in my R34 N/A Skyline but I'm finding conflicting information. Do S13/S14/S15 or R32 NA/ R33 NA fit? https://justjap.com/products/gsp-premium-rear-drive-shaft-l-h-nissan-silvia-s13-s14-s15-3x2-type?currency=AUD&srsltid=AfmBOoqY7EwDaYCUoUU3mxxZ_qrUXkVVHiV4MIN7ozoar6scjnEiekv- would this fit?
×
×
  • Create New...