Jump to content
SAU Community

Help! Car Won't Start


Recommended Posts

k, so car doesn't wanna go. can't jump start it either. it just makes this fast clicking noise, like it's trying to turn but can't or something. sounds like a little hammer drill. any ideas? apart from call nrma, which i will. cheers.

Link to comment
Share on other sites

hmmm nar....well i was gunna say if you hav 2 flat batteries it wont jump.....

are u sure you had a good connection on all the terminals??

because the fast clicking sound just sounds like a flat battery to me...

Link to comment
Share on other sites

Did you just have hte other car idling whilst doing it.

Nearly all cars I've jumped have need the jumping vehicle to rev engine to around 3000RPM before attempting to hit the key on the dead car.

Sometimes letting the connection sit for 30secs can help (But don't do it with shit jumpers) and also make sure the jumpers are hooked up the right way.

Link to comment
Share on other sites

Same thing happened to me after pulling my car out of the garage the other day. Needed to be connected to a running commodore for about 10 mins before it wanted to start. Then after a 40 minute drive she was all sweet

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Update: Done: -Running on 6 cylinders, one injector was gummed up. I made an injector tapper, bit of Teflon on the end of a metal rod.  That fixed the injector. Need to replace one injector plug, the fastener is broken. -Coolant bleed -Fixed 4WD warning light, bleed 4wd system -Fixed electrical problems: alarm, brake lights, various broken plugs  -Got all the parts ready to connect head drain. Head drain is fitted with a blocker atm Todo: -Fuel pump dead, Been cleaning out the tank, had a lot of tobacco looking stuff, think its OEM foam. Got a Walbro 460 to put in. Probably going to add a relay to give the pump a solid 13volts. Replacing all the fuel hoses, in tank etc. -Front drive shafts still not back on. Waiting on parts. Would like to buy some new ones, but probably going to patch these up for now -Replacing gas struts on back door. Waiting to be returned -Headlights need a polish/repair -Going to touch up the paint a little. -Clean up the interior -Connect up heater plumbing -Cosmetic stuff, powder coat replace rusty parts, replace rusty bolts, wiper blades, silicon missing rubber -A million other things
    • Don't do this unless it never gets hot where you are.
    • Upgrade time. Been a long time coming, but I was able to get my GTR to a reputable builder in the States. List of upgrade parts below: RB30 (Sourced from Australia) PRP RB30 timing belt kit with all options Nitto pistons Nitto I beam rods Nitto oil pump King engine bearings New RB26 Head (Grabbed during Heritage run) Kelford 272 cams mild lift Supertech intake and exhaust valves over sized Nitto Head gasket Greddy Oil Pan Sump GKtech fan blade and adapter Koyo Radiator Borg Warner S362 SXE 6boost turbo manifold T4 divided  Turbosmart wastegate Pro-gate 50 lite ID1340x injectors Radium external surge tank Walbro 450 fuel pumps x2   All Parts in hand and awaiting my turn in line at the shop! 
    • For that price I might go buy one for just in case 
×
×
  • Create New...