Jump to content
SAU Community

Looking To Buy A Hot Coupe


griffin3
 Share

Recommended Posts

Hi Skyliner’s

I NEED A NEW CAR- Please I need Help

LOOKING TO BUY A HOT COUPE'-I have looked everywhere and only found 2 cars in WA (GTR V SPEC~N1 with a 5 speed Manual & a Black Auto 350Z GT Skyline) that come close to the machine I really want.

The best one I have found so far is a GTR V SPEC~N1 – it’s the real thing ~1 of 228.

However, Problem is I am disabled and cannot use a manual clutch/gearbox. So

Question

1) GTR -Can it be convert to an auto-Bolt on Auto if possable, so what will be the best gear to use & who could do it & what do you think it may cost! I don't want to cut anything or damage the GTR-so it can be restored to original condition.

2) Can a 350Z auto gearbox or a CVT (Consistent Veritable Transmition) Automatic gearbox fit a N1 block with a converted bell housing. What other mods will be required to function-OR is it too complicated and too costly to do this type of conversion & be cheaper to buy an Auto straight off the bat?

3)I'am Open to ALL suggestions/recommendations of other types of HOT coupe’s that have been customised or have been rebuilt with lots of High Performance Parts by their owners. I want a turnkey solution, so a custom show car would be perfecto. If you have got what I want or know where I can find one please let me know :P ~ [email protected]

Thanks

griffin3

Link to comment
Share on other sites

Mate I really don't want to come across as a prick, but unless the conversion can be done as a 100% bolt-on without having to butcher the N1 in any way, please don't do it.

When I went shopping for my GTR a few yrs ago I had the chance to buy a clean, 100% original V-spec II but after careful consideration I realised a car like that deserved to be kept on it's original condition which is something I couldn't see myself doing so I instead bought a freshly re-built "std-issue" GTR & I couldn't be happier.

By all means get yourself a GTR but please think seriously about going with a non "spec" version. I know there's every chance whoever buys the N1 will trash, thrash & otherwise f**k with it without truly realising what they have but I'd also like to think whoever buys it will keep it in the condition it deserves.

Having said all that, the Stagea auto will probably be the go & might even be a "bolt-in" & it that's the case, grab the N1 & enjoy every single day of owning it. If it helps you any, shoot me a PM & I might be able to help you out with sourcing the parts you need.

Link to comment
Share on other sites

What year is the GTR?

if it's an early model say R32, use the GTS4 auto box, get the MV automatics shift kit, R32 pedal box, mount the trans computer under a kick panel and wire it up

in saying that though, the GTRs never came out with an auto transmission, so it won't retard the timing everytime the gear is changed, which means you'll get a slightly rough change at full power

Edited by skybarge
Link to comment
Share on other sites

whoops forgot one other thing:

diff, you'll need the auto diffs otherwise you'll have a very weird and possibly slow diff ratio,

so parts needed:

trans cooler(or radiator with one in the bottom off an auto skyline)

GTS4 or Stagea gearbox

GTS4 or Stagea pedal box or you could use the existing brake and accel

Auto gearbox flexi plate?

Auto ecu

Auto loom

Park brake wiring

Reverse light wiring from auto

MV Auto shift kit(or your box will go a lot faster, especially under the torque of the RB26)

maybe a high stall converter

front engine diff off GTS4 or stagea - will have to match the rear diff

rear diff off GTS4 or stagea

Total cost anywhere from $1000 - $2500(in my opinion definitely not worth it, unless you are partially disabled and need a car auto?) - "whoops my bad I missed that part :nyaanyaa: no offence intended"

then parts to keep to convert it back:

everything you've taken off,

Gearbox, pedal box, pedals, clutch, flywheel etc

Edited by skybarge
Link to comment
Share on other sites

However, Problem is I am disabled and cannot use a manual clutch/gearbox. So

skybarge.... this is actually the whole reason he is asking about it....

def a good place to start some research with it anyway griffin3.... you shouldn't let ANYTHING stop you from doing what you love

Link to comment
Share on other sites

oh true, I thought i read that part, oh well that answers the question I wrote

Definitely do it then man :) I would do the same thing to be honest :laugh:

There are a few people over here driving them, one person has lost an arm and still manages to use a hollinger dog box 6 speed and has round 700hp :S

So anything is possible, if you need anymore help just ask :O

Link to comment
Share on other sites

Neil

all RBs are the same at the back end for the bell housing, so the Auto won't be a problem. I was contemplating an auto GTR for my wife who is disabled as well. I'd ignore any advice not to modify a "spec" model in the 32/33 range as the differences are almost non existent, especially after much swapping of brakes and new suspension after years of punishment. I don't rate the 33 ALSD at all so try to avoid the V-spec models, a non V-spec is a better alternative. An N1 though is a worthy machine to own and deserves to be driven daily so fill your boots and put in the new diff ratios while you are at it.

No help with the V35 but my thoughts are the ECUs would give dramas playing with the CVT-8 and there aren't enough parts available yet to play that game.

Link to comment
Share on other sites

Neil

all RBs are the same at the back end for the bell housing, so the Auto won't be a problem. I was contemplating an auto GTR for my wife who is disabled as well. I'd ignore any advice not to modify a "spec" model in the 32/33 range as the differences are almost non existent, especially after much swapping of brakes and new suspension after years of punishment. I don't rate the 33 ALSD at all so try to avoid the V-spec models, a non V-spec is a better alternative. An N1 though is a worthy machine to own and deserves to be driven daily so fill your boots and put in the new diff ratios while you are at it.

No help with the V35 but my thoughts are the ECUs would give dramas playing with the CVT-8 and there aren't enough parts available yet to play that game.

Hi Skyliner's

I would like to thank everyone for there idears and sugestions,due to illness "again" :)

and all the hospital visits I can't do anything yet! until I'v recovered, This realy Pissed me off as I'm sick of bloody hospital, but at least I'v got something to look forward too as I'm realy hanging out to get my new wheels. I'll check back with you all as soon as they let me out of hospital "They will not let me take my laptop in with me-bummer". Thanks guys you have given me some much needed hope and something to look forward too. Many thanks to all, be safe out there, :D griffin

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey Matt, Link pointed to the 2x IGN power sources from the car as a likely issue, and sure enough pin 31 in the loom does not have power when IGN is on (24 does). So at the ECU, (and this is probably the case for R32 as well as C34) most of the ECU loom goes through the firewall behind the blower motor and there are 2 plugs (of 3 in the junction box) which go up and under the dash, the third plug heads under the carpet to places unknown (likely a body to dash loom joint) So, I started to follow that problem through yesterday. Like Johnny (and R32) I assumed that power was supplied through the 2 connectors near the left headlight so I spent some time pulling the intake etc off and cleaning of 400,000klm of dirt and oil leaks and checking those pins, but there was nothing related to the engine parts or ignition fuses there (and no purple with white trace wire in either side of the connectors) Given that the wire didn't seem to go via the engine bay, I then checked there is continuity from Pin 31 to the second connector to confirm no wiring issue in the ECU loom (it looked likely, given how much that has been hacked up over the years!). The pin marked with the purple dot is the other end of the wire to Pin 31 Then I check for IGN power in the dash loom side of that connector with the key on. Nothing. Given that loom goes up and underneath the top of the dash there is no tracing it without taking the dash out, so I went to the driver's side to see if I can find the other end of that (I'm expecting to get to big body junction boxes after I pull enough apart). However, to get to those functions, I had to pull the covers off the drivers side, I'm pretty sure the problem is in this pic Yep, factory remote start (bottom right), local immobiliser (middle) surrounded by 20 years of butchery. Plan is to totally remove the remote start and immobiliser (I think I will lose remote central locking temporarily as a result) to remove all the suspect stuff given I have other more modern security in the car It's gonna take a while, and it is both cold and uncomfortable out in the shed, not looking forward to it.
    • Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
×
×
  • Create New...