Jump to content
SAU Community

Recommended Posts

hey guys there is a fix for stagea tie rod ends a guy can fix your old ones and they are cheaper then genuine ones he does them very quick to save down time just depends on how long it takes to frieght them to him new castle area is same day fix sydney 2 days and other places aloow a couple of days all depends on how long it taks for you to frieght them to him and back he is good at what he does he has done mine and i happy as he a top bloke willing to help every one out he also does ball joints and all boots for joints let me no if any one is in need and will sought something out cheers guys

Link to comment
https://www.sau.com.au/forums/topic/180017-stagea-tie-rod-ends/
Share on other sites

hey guys there is a fix for stagea tie rod ends a guy can fix your old ones and they are cheaper then genuine ones he does them very quick to save down time just depends on how long it takes to frieght them to him new castle area is same day fix sydney 2 days and other places aloow a couple of days all depends on how long it taks for you to frieght them to him and back he is good at what he does he has done mine and i happy as he a top bloke willing to help every one out he also does ball joints and all boots for joints let me no if any one is in need and will sought something out cheers guys

Gee that was hard to read...

thanks!

no offence mate but as my thread said none in australia all on back order from japan and no eta on when they are getting here and i need my car back on the road for jamboree so not much i could do the guy gives a warranty as good as any other part warranty i would rater have my car back on the road then be still waiting on parts to come concidering i only just bought it off cy and wanna have it tuned again before i go

Edited by bernardshorty

yeh bud he is called the ball joint doctor he does all joints he does a mad job i sent him mine this morning and he called me and said they are on there way back now

his contact number is 02 66582898

or mobile is 0411862496

he is located at sawtell nsw top guy does his job quick to keep you on the road with hardly any down time hope it helps some of you other guys if yous are waiting on tie rod ends i also have 1 genuine one for sale as well brand new in box only could get me one in australia hit me back on here if any one is interested

well mate if you can do better then me at finding them let me no cause i have searched every where and measured you name it i have done it and no one makes one with a big enough taper the thread yeh heaps fit but the taper which is 13mm at top and 16.5 at the bottom no one makes you can try one that goes close to fitting and it will chop out quick as but hey what would i no i only a mechanic but i open to be corrected dont get me wrong but as i say i could not find a company that made one of that taper i posted this as i hope it can help people your choice if you do it or not it has worked for me and have no complaint of the speed and quality of repair i been a week trying to match it up and alot of failed attempts and this worked for me that is all i can say but if some one can find non gen post it love to find a cheaper option as every one does

cheers guys

well mate if you can do better then me at finding them let me no cause i have searched every where and measured you name it i have done it and no one makes one with a big enough taper the thread yeh heaps fit but the taper which is 13mm at top and 16.5 at the bottom no one makes you can try one that goes close to fitting and it will chop out quick as but hey what would i no i only a mechanic but i open to be corrected dont get me wrong but as i say i could not find a company that made one of that taper i posted this as i hope it can help people your choice if you do it or not it has worked for me and have no complaint of the speed and quality of repair i been a week trying to match it up and alot of failed attempts and this worked for me that is all i can say but if some one can find non gen post it love to find a cheaper option as every one does

cheers guys

Dude, not to be rude, but can you please use some sentence structure. Maybe throw in a full stop here and there so we can actually figure out what you are saying.

mmmm i dunno wot the kafuffle is i cood read it ok.oh and thanks for the info mate i apreciate it even if others just have time to pik on ya spellin and gramma.i for one am not up there in the educational stakes but what the hey i dont realy care but i spose seing im not a educated person ill just keep my findings to myself.---------------sorry guys im just a little disgruntled at the reaction to a guy who was just trying to help.

mmmm i dunno wot the kafuffle is i cood read it ok.oh and thanks for the info mate i apreciate it even if others just have time to pik on ya spellin and gramma.i for one am not up there in the educational stakes but what the hey i dont realy care but i spose seing im not a educated person ill just keep my findings to myself.---------------sorry guys im just a little disgruntled at the reaction to a guy who was just trying to help.

I second that. Leave the guy alone: you get the gist of what he's saying. I appreciate any help I can get, which is a good thing, because the minister for war and finance (the missus) says I need as much as I can get...

I'm not bagging him, all I'm asking is that he use some sentence structure.

It DOESN'T have to be perfect, I don't care if he (or anyone) uses lower case letters everywhere, but something as simple as a full stop added in at the end of each sentence helps a lot.

hey guys sorry if i not write perfect but unlike some i dont sit at a desk i only get a few mins to write this up between jobs. i hope it helps some people and as for the reclamping bit no he injects them with pollima its stuff nassa uses and invented .

what happens to ya joints is the plastic insert inside the housing which cups the ball to stop it moving wears and that where ya movement comes from.

he fills the joint wiht this pollima and it goes off hard it is a lot stronger then the standard plastic insert.

he also greases the joint to prevent wear and fits a grease nipple to the joint as well so you can service it unlike the standard one which is a sealed unit that is why they flogg out. i have a brand new nissan joint i orded and the difference in the joints was so noticable the genuine one moves so easy and the rebuilt one is a lot tighter and i think better but all i can say is ring the guy and he will explain it alot better then i can .

in the end its your choice i was only trying to help in the future i will keep to my self .

only reason i posted was cyrus told me you were a top bunch of guys from what i have seen i here most are top lads who like help and like to help others . cheers to you guys and others keep paying some one to fix your car for ya . i can handle a joke but if your problem is my education then get a life

and i would like to say sorry to the guys who help and like to help others .

this was not directed at you guys only the people with nothing better to do

in simple term if you want your joints fixed which i done and liked call his numbers which i have posted

Good to hear it is sorted Bernard!

Not to hi-jack the thread or anything, but just from my dealings with Bernard, I found him to be a very honest, down to earth guy who has built several very tough cars in the past and I believe will do wonders with my old beast, just give him a chance like we first did with Yudi eh!

That and I still cant find the warrantee paperwork Bernard, I'll ring up AVWG today when I get a chance to see how we transfer it across to you.

Thanks bernard

enjoy Ska's old car, great pickup youve got there.

Got my beast booked in for the final tune in one months time, (brake lines/rotors/pads + flush, adj.cam gear pulley, relocated oil filter, attessa fluid flush, full service + dyno tune 2xpiggybacks). I will ask the mechanics as they are working along to give the Stagea a good look-over. But *xfingers* I dont have any issues at this stage.

expecting around 205awkw at 1 to 1.1bar :)

which is exactly my goal. been right on 30k incl car, my original budget, so Im sure I'll be happy with that.

thanks cy i will look into it and thanks tangles i love my stage big plans for this car as bigger turbo is sitting on my bench its a hybrid t34r top mount manifold 48mm externial gate and thing everyone loves ? the screamer pipe in process of getting 750cc injectors z32 air mass meter just arived as well .

ready to start the fitting process soon .

oh and cy that fuel pump cradle arived today after a week of it being lost in transit so no more fuel smell .

stoked as ha ha it to cold to drive around with windows down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...