Jump to content
SAU Community

Recommended Posts

hey, just thought i'd share. got the power fc installed and dyno tuned today by ed at autotech (him and peter are deadset champs btw!). car is COMPLETELY stock aside from a no name aftermarket cat back exhaust. was making around 160kw and now busts out 212kw! not too shabby for my first mod i have to say! drives like a bitch too, i'm pumped!

post-29555-1186646360_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/
Share on other sites

Awesome result Nick must be stocked.

But here is my little bit of input... not trying to be a tight arse but there is no way in hell you could make 212rwkw off just a PFC and a cat back exhaust. Either his dyno is reading even higher than normal or you have some more mods (i am sure it's the first :nyaanyaa:). Shauno's made slightly more than that and he had a heap more mods. The stock power output seems about right but 50kw from a tune with a stock turbo, stock cat, stock dump pipe, stock air filter (although this is not such an issue). What boost is it running ???

and he could have leaned it out even more thats about an 11.4 - 11.6 through out i think he did mine at 11.8 - 12.0

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3279046
Share on other sites

as far as i know the boost restrictor was already out. i felt the boost line off the solenoid and couldn't really feel anything inside it so...

212 does seem like a lot to me off a stocker, but if the original output is about right is there any reason to suspect the new output is off? boost i would imagine is sitting just under a bar. i don't have a boost controller yet and there's no reason for it to be running any higher than stock (minus the restrictor) boost. i dunno, hopefully its right, but if it is an exaggerated figure i don't really care that much cuz the car definitely feels much more responsive, smoother and much more powerful!

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3279295
Share on other sites

That power curve is smooth as a baby's butt... Very nice.

Im with Leigh on this one... There's no way that a stock RB25 can put 212kw to the wheels with only a Power FC exhaust and cooler... There must be something else that you dont know about that was done to it in Japan by a previous owner.

My RB25 put down 230kw at the wheels on the same dyno and Ive got a Power FC, 3" exhaust, Front mount cooler, Splitfire ignition coils, 550cc injectors + 040 Fuel pump and a GT30 turbo (only running 12psi at the moment).

You might have a high flowed turbo that you dont know about, because peak boost looks like its coming on a bit late judging by that readout and 1 bar is allot for the standard turbo, they usually let go at about that sort of pressure.

High flow turbo's usually dont look any different to stock from the outside.

Anyway, nice result and a very nice power curve, lots of mid range torque, it must feel really responsive to drive.

Edited by Bullet32
Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3279482
Share on other sites

fark me i appologise i thought it was an R33 GTS-T same as Mick. I figure if it's on Autotech then it has to be RWD or FWD damn r32's and there fuses hehe

My appologies nick as the r32 gtrs should be able to put that sort of power out. Still 50KW is an awesome improvement for just a pfc... i feel like a n00b for jumping on the defence :)

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3279972
Share on other sites

well it definitely wasn't the falcon! thats cool guys, appreciate the input nonetheless. question, with the boost restrictor out there isn't any chance that the turbos will go about 1 bar is there? as far as i'm aware they hold at about 14 but i don't have a boost controller so i can't say for sure. in the mean time i'm holding off giving them complete death for fear of shattering one.

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3280092
Share on other sites

well it definitely wasn't the falcon! thats cool guys, appreciate the input nonetheless. question, with the boost restrictor out there isn't any chance that the turbos will go about 1 bar is there? as far as i'm aware they hold at about 14 but i don't have a boost controller so i can't say for sure. in the mean time i'm holding off giving them complete death for fear of shattering one.

I dont know if you'll get big boost spikes from the standard turbo's they're pretty reliable... But if you want to know exactly what psi youre getting under load Pete should be able to tell you. He'll put an inline sensor in one of your boost hoses on the plenum side that reads the pressure level while the car is on the dyno and gives a very accurate reading of your boost level.

*** Dont trust your boost guage ***

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3280179
Share on other sites

9.5 ish stock, 15 without the restrictor. don't know if Pete's dyno is optimistic or not, but 212 rwkw from a GTR with those mods seems fine to me. a VDO boost gauge (good enough for the Gamballa Avalanche, good enough for me) costs bugger all and no more guessing. got mine from Premier Instruments in Dickson.

Edited by Scooby
Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3280833
Share on other sites

Good result,

Is pretty much normal for something like that,

I think my first gtr with the same mods and cam gears made about 230kw so is pretty reasonable.

I do agree with leech though, the afrs are a little rich still and should be at 12.0 to 1 to get the best result.

12.4 12.5 will get you your best power but leaves it a bit on the edge for street driving.

Ed does like to leave them on the safe side though.

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3281060
Share on other sites

That's a pretty darn good result, i had my car tuned there by Ed as well, really happy with the way it drives now, totally new car.

Someone told me Ed left Integra and he's at Autotech now?? That true? I haven't had my car serviced since that little NSW licence suspension....

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3285503
Share on other sites

basically just wanted a solid safe tune. didn't have much of a hand in it as i was at work while it was going on, and as people have said, could've still leaned out the afr's a bit and will most likely go back for that at some stage but yeah - the car's definitely not maxed out or anything.

Link to comment
https://www.sau.com.au/forums/topic/180188-woohoo/#findComment-3286070
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...