Jump to content
SAU Community

Recommended Posts

Hey guys, just wanted to ask a question about when I start up my recently turboed R33 GTS4 (rb25deT)

I got it dynoed now and got the timing fixed up, it is running rich, but a powerfc or something alike will fix that,

Problem is when I start to drive the car in the morn and it is cold, I'm finding that at about 5 grand it is sounds like it is missfiring, it wont go past bout 4,800 - 5,000.

When the car is warm she is better, still finding when you want to get it in the high revs that she hesitates for a lil, which it didnt when it was an N/A.

I dont know what it is,because as I said the timing was fixed up and new sparks, which were gapped correctly.

Is this a turbo thing or do I need to fix up sumthing?

Thanks, Adam

Link to comment
https://www.sau.com.au/forums/topic/180744-problems-on-start-up/
Share on other sites

it is probably your coils aren't able to keep up with the job. try and borrow someones coils and see if that gets rid of it. if it does then you need new coils.

also, find out what sort of plugs were used, with what gap and what heat range.

LOL.... I was just waiting for somone to say it is stupid to push her first thing... but when u live on a main road and trying to get out in morning traffic.....

but that still doesnt explain when the car is warm and at 5 grand.. why it is still a lil hesitant

so coils then? hmm... as this is my first car everything is new to me.. could anyone point me in the right direction? places to buy? etc... anything is handy!

Cheers,

Adam

well split fires are a dirct replacement coil thats gives youa few more horspower, negun.com have splitfires for 500 buck delivered to ur door or try a local jap wreckers they range from 110 to 150 depends on wrecker and what series the car is one is a little cheaper than series 2

Thanks for the help guys, I would have thought the current coils would handle alright... unless do turbo skylines have more powerful ones?

Im only getting roughly 150-160 rwkw + 10-20% at front so max would be bout 170 - 180 awkw all up.. you wouldn't need $500 coils yet would you?

thought my fuel pump would go before anything

Hey guys.. update...

The miss firing is also when the car is at operating tempurature.

I did find it wierd when the car got dynoed roughly 3 days ago and there was no missfiring, but I figured out why when doing a few tests...

NOTE: The missfiring or whatever problem is happening starts at bout 5 grand

1. It happens when I drop a gear and put my foot down..

2. It happens when I put my foot down in any gear..

3. It DOESNT happen when I slowly rev the car up...

Which is why when the car was on the dyno and it was powered up slowly why it didn't do anything.

Does this change anything? am I still meant to be looking for coils? any good reccommendations on brands?

Thanks, Adam

After 2 hours on a dyno my car was fine on stock coils.

on the road it misfired

to fix it the plugs were gapped down to 0.6 then more dyno....

but i'm still getting new coils when the new turbo goes in.

So basiclly new coils are the only way out of this? cuz at first the turbo conversion was a bargin.. now everytime I fix up one thing the next happens!

Im happy with the power gains.. but can 33 gtst's use other engine coilpacks?like ... 34 gtr's ? or 32 gtr's...etc...

GRR... Annoying little things these are.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
×
×
  • Create New...