Jump to content
SAU Community

Recommended Posts

as stated i am after pictures of guages mounted on the bonnet of R33s, i have a white 33 in which i will be putting 3 guages on the bonnet in painted white cups( cant be defected if painted )

i dont want your opinion on what you think on this style, just pictures please,

your assistance will be greatly appreciated. Michael

Link to comment
https://www.sau.com.au/forums/topic/180750-pics-off-r33s-with-guages-on-bonnet/
Share on other sites

I think that look is stupid and impractical.

In the old days, mechanical gauges had to be outside the cabin as they had to have the measured fluid running through the gauge unit itself (eg oil pressure gauge had an oil line through it).

Nowadays with electronic gauges there is no need for them to be placed outside.

If you have them outside, you can get water in the electronics of the gauge during rain and in inclement weather you can't even see the gauges.

you guys must be deaf dumb and stupid, either that or you cant read... i said i wasnt interested in your opinions...

im not a sheep.. dont follow trends i do things how i see suit... so i dont want guages up me pillars and apexi rsm's all over me dash.. im goin for a clean effective look.... i am into car audio to and my a pillars are fiberglass and house my tweeters.

Edited by BOOST ON

Hay Michael.

I've seen it done while I was living in Japan.

I can't find any photos of it on my computer at the moment. I'll have to go through all my photo albums and see if I've got any there.

It's something I've been thinking about too. But I'm afraid of them being knocked off again. I had them ripped off my Panel Van a few years ago, and I never replaced them.

I'll keep looking through my photos and see what I come up with.

Yeah i think monkey boys right you wont find many lines with the gauges on the outside, personally i think it looks good tho only prob is id have my arse bent over by the popo the second i left my house if my gauges were done like that :)

its not a defectable so long as the guage cups arent polished/chrome, i know this because a mate of mine had it on his 33, his were chrome, had to paint them to remove the defect..

basically i am goin with a bit of a theme on my car, to bring a bit of old school to the new school, my car will be lowered to sit around about at the top of the tyre, its sits on 18' work wheels, i am cutting out the center of the bar to expose fmic, havin white (cupped)guages on bonnet, and i am white walling my tyres, so now you can see that i am steering very clear of the usual.... shopping list down the door with the biggest spoiler i can fit on the boot and loudest milo tin for an exhaust, i am goin for clean st look no autosalon business

Edited by BOOST ON
  • 2 weeks later...

mate i understand where u are coming from but just an opinion i was lookin at one line that had gauges mounted in the dash above heater vents looks very sleek and clean thats the look im goin for just a tip mate

  • 3 weeks later...
  • 1 month later...

hey mate, not having a digg, but you said you dont want to be defected with the gauges onthe bonnet but then you said you want the loudest exhuast..the popo will pick up on the exhaust before the gauges..

*cough* theft target

Cops can defect you on anything if they see it as unsafe or not roadworthy.

if u have them on the bonnet, they have to be electrical, not mechanical=illegal.

also THEY CANT BE INSURED.

THEY ARE NOT COVERED BY ANY INSURANCY AGENCY. i was told this personally by, NRMA, JUST CAR AND stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
×
×
  • Create New...