Jump to content
SAU Community

Recommended Posts

This is a question that is very vague to answer, and it also a question that doesnt really matter. According to some stuff that ive read, the power at the wheels is 80 - 85% what it is at the engine. Still this is just an estimate, and like I said, who really cares ...

Oh, in case you dont know the kw - bhp conversion .. its x 1.341 ... so if you have 245 kW at the wheels, you have about 328 rwhp. Not that that really matters either .. its just a measurement and i rekon ppl often quote it just cause its a bigger number and sounds better ... but not always.

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-377916
Share on other sites

There is no definitive equation for determining flywheel horsepower from rear-wheel horsepower.

InExtremis you said that you believed it was 80-85%, well i heard it was between 67-75% (2/3 and 3/4), so that proves that it depends on multiple variables. All wheel drives also lose much more power through drivetrain loss. Ill outline a few variables that i know of but someone with dyno experience can elaborate:

* wheel/tyre size

* how well the car puts its power down

* weight distribution

In the latest MOTOR mag they had a Holden v Ford comparison and dynoed all 7 cars. Some interesting results:

* FPV GT = 290Kw@fly but made 225Kw@wheels

* HSV GTS = 300kw but made 222Kw@wheels

* Holden Caprice = 245Kw@fly but made only 158Kw@wheels

* Commodore SS = 235Kw@fly but made 182Kw@wheels

* Commodore SV8 = 235Kw@fly but made 178Kw@wheels

As you can see descrepancies are apparent in these examples. One phenomenon did occur to me the cars that performed best had more weight over the rear axles...

Hope this helps...

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-378476
Share on other sites

For dyno-testing yes more more weight in the back will give better results (generally speaking) for RWD cars. Thats why sometime you see guys sitting in or on the boot of cars being dynoed!!!!

As for on the road, there is a fine line between good power down and bogging, and more finely adding extra weight to aid power down and the detriment of having a heavier car (the heavier the car the worse power to weight ratio).

Think of a leaf sprung suspension equiped ute with big horsepower. There's 3/5ths of stuff all weight in the back therefore there is going to be a difficulty in putting the power to the ground because the tyres wont be sitting as heavily on the road...

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-378713
Share on other sites

only bad thing with this info is.... you are assuming that they are actually the quoted figure @ fly. Figures could well be totally correct, and what im saying would have no relevance.. but it may not be the case .

Originally posted by HSVKLR

In the latest MOTOR mag they had a Holden v Ford comparison and dynoed all 7 cars. Some interesting results:

* FPV GT = 290Kw@fly but made 225Kw@wheels

* HSV GTS = 300kw     but made 222Kw@wheels

* Holden Caprice = 245Kw@fly but made only 158Kw@wheels

* Commodore SS = 235Kw@fly but made 182Kw@wheels

* Commodore SV8 = 235Kw@fly but made 178Kw@wheels

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-379160
Share on other sites

Roughly the number of horsepower at the rear wheels is the same number of kW's at the flywheel.

so in butthead's case 245rwkw = 327rwhp

therefore if the car has 327rwhp, the engine produces 327kW (436hp) at the flywheel (roughly)

i dont think this would apply to all cars but seems to be pretty close on rwd skylines.

hope that helps....

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-379697
Share on other sites

Haha no worries InExtremis - it's interesting that they did an article with dyno results of all our "favourite" australian cars.

Just out of interest the XR6T which won the comparison for best all round ability made 185Kw@wheels... not bad eh?!! They even made mention of the "R32 Skyline" in the article - saying not since then has a 6cyl decimated the opposition in such a way....

Btw RB25 i like your formula in working it out - very interesting but if you apply it a stock R32 GTSt see what happens:

Roughly 110kw@wheels=147.4hp@wheels

therefore 147kw@flywheel (158/162kw stock)

Almost but not quite....

Link to comment
https://www.sau.com.au/forums/topic/18093-horsepower/#findComment-379853
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It will sound tragic and you wished you didn't have 1x exhaust per turbo. There's a reason why most S55 owners change to a single mid pipe.
    • Echo the comments about the well preserved condition it's in. It has the aero bumper too for extra points. Nice car, and please keep it like that! 🙂
    • 1. There are no real performance benefits. It sounds different, and as the pipes are not as large diameter you can claw back some undercar clearance or run lower (if that's your thing). 2. Twin pipes, offering exactly the same cross sectional area as a single pipe** will have higher pressure drop - so will not flow as well. That's because there is more surface area of wall per cross sectional pipe area, hence more frictional losses. ** But of course, it is almost impossible to get 2 pipes that are exactly the same XS area as a given typical single pipe. eg, 2x2" is not the same as 1x 3", although it is close. If the 2x pipes add up to less XS area than the single - it will just be flat out worse. If the 2x pipes add up to a bit more than the single, then it might come out as a wash. If the 2x pipes are substantially more XS area than the single, then it will probably flow a little better. 3. No. Why would there be? What have cats got to do with boost creep?*** ***But for f**ks' sake, please run a cat. 4. If you want.
    • UPDATE: was able to have the bracket repaired and base repaired, seat is like new now ;)
    • I was going to say it looks right out of Gran Turismo photoshoot when you just buy the car. (in a good way)
×
×
  • Create New...